€•@4      Œsphinx.addnodes”Œdocument”“”)”}”(Œ	rawsource”Œ ”Œchildren”]”(Œtranslations”ŒLanguagesNode”“”)”}”(hhh]”(h Œpending_xref”“”)”}”(hhh]”Œdocutils.nodes”ŒText”“”ŒChinese (Simplified)”…””}”Œparent”hsbaŒ
attributes”}”(Œids”]”Œclasses”]”Œnames”]”Œdupnames”]”Œbackrefs”]”Œ	refdomain”Œstd”Œreftype”Œdoc”Œ	reftarget”Œ"/translations/zh_CN/scsi/qlogicfas”Œmodname”NŒ	classname”NŒrefexplicit”ˆuŒtagname”hhhubh)”}”(hhh]”hŒChinese (Traditional)”…””}”hh2sbah}”(h]”h ]”h"]”h$]”h&]”Œ	refdomain”h)Œreftype”h+Œ	reftarget”Œ"/translations/zh_TW/scsi/qlogicfas”Œmodname”NŒ	classname”NŒrefexplicit”ˆuh1hhhubh)”}”(hhh]”hŒItalian”…””}”hhFsbah}”(h]”h ]”h"]”h$]”h&]”Œ	refdomain”h)Œreftype”h+Œ	reftarget”Œ"/translations/it_IT/scsi/qlogicfas”Œmodname”NŒ	classname”NŒrefexplicit”ˆuh1hhhubh)”}”(hhh]”hŒJapanese”…””}”hhZsbah}”(h]”h ]”h"]”h$]”h&]”Œ	refdomain”h)Œreftype”h+Œ	reftarget”Œ"/translations/ja_JP/scsi/qlogicfas”Œmodname”NŒ	classname”NŒrefexplicit”ˆuh1hhhubh)”}”(hhh]”hŒKorean”…””}”hhnsbah}”(h]”h ]”h"]”h$]”h&]”Œ	refdomain”h)Œreftype”h+Œ	reftarget”Œ"/translations/ko_KR/scsi/qlogicfas”Œmodname”NŒ	classname”NŒrefexplicit”ˆuh1hhhubh)”}”(hhh]”hŒSpanish”…””}”hh‚sbah}”(h]”h ]”h"]”h$]”h&]”Œ	refdomain”h)Œreftype”h+Œ	reftarget”Œ"/translations/sp_SP/scsi/qlogicfas”Œmodname”NŒ	classname”NŒrefexplicit”ˆuh1hhhubeh}”(h]”h ]”h"]”h$]”h&]”Œcurrent_language”ŒEnglish”uh1h
hhŒ	_document”hŒsource”NŒline”NubhŒcomment”“”)”}”(hŒ SPDX-License-Identifier: GPL-2.0”h]”hŒ SPDX-License-Identifier: GPL-2.0”…””}”hh£sbah}”(h]”h ]”h"]”h$]”h&]”Œ	xml:space”Œpreserve”uh1h¡hhhžhhŸŒ</var/lib/git/docbuild/linux/Documentation/scsi/qlogicfas.rst”h KubhŒsection”“”)”}”(hhh]”(hŒtitle”“”)”}”(hŒ!Qlogic FASXXX Family Driver Notes”h]”hŒ!Qlogic FASXXX Family Driver Notes”…””}”(hh»hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1h¹hh¶hžhhŸh³h KubhŒ	paragraph”“”)”}”(hX  This driver supports the Qlogic FASXXX family of chips.  This driver
only works with the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI!  cards as well as any other card based on the FASXX chip
(including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).”h]”hX  This driver supports the Qlogic FASXXX family of chips.  This driver
only works with the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI!  cards as well as any other card based on the FASXX chip
(including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).”…””}”(hhËhžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khh¶hžhubhÊ)”}”(hŒSThis driver does NOT support the PCI version.  Support for these PCI
Qlogic boards:”h]”hŒSThis driver does NOT support the PCI version.  Support for these PCI
Qlogic boards:”…””}”(hhÙhžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khh¶hžhubhŒblock_quote”“”)”}”(hŒ * IQ-PCI
* IQ-PCI-10
* IQ-PCI-D
”h]”hŒbullet_list”“”)”}”(hhh]”(hŒ	list_item”“”)”}”(hŒIQ-PCI”h]”hÊ)”}”(hhöh]”hŒIQ-PCI”…””}”(hhøhžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khhôubah}”(h]”h ]”h"]”h$]”h&]”uh1hòhhïubhó)”}”(hŒ	IQ-PCI-10”h]”hÊ)”}”(hj  h]”hŒ	IQ-PCI-10”…””}”(hj  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khj  ubah}”(h]”h ]”h"]”h$]”h&]”uh1hòhhïubhó)”}”(hŒ	IQ-PCI-D
”h]”hÊ)”}”(hŒIQ-PCI-D”h]”hŒIQ-PCI-D”…””}”(hj&  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khj"  ubah}”(h]”h ]”h"]”h$]”h&]”uh1hòhhïubeh}”(h]”h ]”h"]”h$]”h&]”Œbullet”Œ*”uh1híhŸh³h Khhéubah}”(h]”h ]”h"]”h$]”h&]”uh1hçhŸh³h Khh¶hžhubhÊ)”}”(hŒ"is provided by the qla1280 driver.”h]”hŒ"is provided by the qla1280 driver.”…””}”(hjH  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khh¶hžhubhÊ)”}”(hŒONor does it support the PCI-Basic, which is supported by the
'am53c974' driver.”h]”hŒSNor does it support the PCI-Basic, which is supported by the
â€˜am53c974â€™ driver.”…””}”(hjV  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khh¶hžhubhµ)”}”(hhh]”(hº)”}”(hŒPCMCIA Support”h]”hŒPCMCIA Support”…””}”(hjg  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1h¹hjd  hžhhŸh³h KubhÊ)”}”(hX9  This currently only works if the card is enabled first from DOS.  This
means you will have to load your socket and card services, and
QL41DOS.SYS and QL40ENBL.SYS.  These are a minimum, but loading the
rest of the modules won't interfere with the operation.  The next
thing to do is load the kernel without resetting the hardware, which
can be a simple ctrl-alt-delete with a boot floppy, or by using
loadlin with the kernel image accessible from DOS.  If you are using
the Linux PCMCIA driver, you will have to adjust it or otherwise stop
it from configuring the card.”h]”hX;  This currently only works if the card is enabled first from DOS.  This
means you will have to load your socket and card services, and
QL41DOS.SYS and QL40ENBL.SYS.  These are a minimum, but loading the
rest of the modules wonâ€™t interfere with the operation.  The next
thing to do is load the kernel without resetting the hardware, which
can be a simple ctrl-alt-delete with a boot floppy, or by using
loadlin with the kernel image accessible from DOS.  If you are using
the Linux PCMCIA driver, you will have to adjust it or otherwise stop
it from configuring the card.”…””}”(hju  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h Khjd  hžhubhÊ)”}”(hŒWI am working with the PCMCIA group to make it more flexible, but that
may take a while.”h]”hŒWI am working with the PCMCIA group to make it more flexible, but that
may take a while.”…””}”(hjƒ  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h K%hjd  hžhubeh}”(h]”Œpcmcia-support”ah ]”h"]”Œpcmcia support”ah$]”h&]”uh1h´hh¶hžhhŸh³h Kubhµ)”}”(hhh]”(hº)”}”(hŒ	All Cards”h]”hŒ	All Cards”…””}”(hjœ  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1h¹hj™  hžhhŸh³h K)ubhÊ)”}”(hXP  The top of the qlogic.c file has a number of defines that controls
configuration.  As shipped, it provides a balance between speed and
function.  If there are any problems, try setting SLOW_CABLE to 1, and
then try changing USE_IRQ and TURBO_PDMA to zero.  If you are familiar
with SCSI, there are other settings which can tune the bus.”h]”hXP  The top of the qlogic.c file has a number of defines that controls
configuration.  As shipped, it provides a balance between speed and
function.  If there are any problems, try setting SLOW_CABLE to 1, and
then try changing USE_IRQ and TURBO_PDMA to zero.  If you are familiar
with SCSI, there are other settings which can tune the bus.”…””}”(hjª  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h K+hj™  hžhubhÊ)”}”(hXf  It may be a good idea to enable RESET_AT_START, especially if the
devices may not have been just powered up, or if you are restarting
after a crash, since they may be busy trying to complete the last
command or something.  It comes up faster if this is set to zero, and
if you have reliable hardware and connections it may be more useful to
not reset things.”h]”hXf  It may be a good idea to enable RESET_AT_START, especially if the
devices may not have been just powered up, or if you are restarting
after a crash, since they may be busy trying to complete the last
command or something.  It comes up faster if this is set to zero, and
if you have reliable hardware and connections it may be more useful to
not reset things.”…””}”(hj¸  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h K1hj™  hžhubeh}”(h]”Œ	all-cards”ah ]”h"]”Œ	all cards”ah$]”h&]”uh1h´hh¶hžhhŸh³h K)ubhµ)”}”(hhh]”(hº)”}”(hŒSome Troubleshooting Tips”h]”hŒSome Troubleshooting Tips”…””}”(hjÑ  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1h¹hjÎ  hžhhŸh³h K9ubhÊ)”}”(hŒrMake sure it works properly under DOS.  You should also do an initial FDISK
on a new drive if you want partitions.”h]”hŒrMake sure it works properly under DOS.  You should also do an initial FDISK
on a new drive if you want partitions.”…””}”(hjß  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h K;hjÎ  hžhubhÊ)”}”(hŒ]Don't enable all the speedups first.  If anything is wrong, they will make
any problem worse.”h]”hŒ_Donâ€™t enable all the speedups first.  If anything is wrong, they will make
any problem worse.”…””}”(hjí  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h K>hjÎ  hžhubeh}”(h]”Œsome-troubleshooting-tips”ah ]”h"]”Œsome troubleshooting tips”ah$]”h&]”uh1h´hh¶hžhhŸh³h K9ubhµ)”}”(hhh]”(hº)”}”(hŒ	Important”h]”hŒ	Important”…””}”(hj  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1h¹hj  hžhhŸh³h KBubhÊ)”}”(hX)  The best way to test if your cables, termination, etc. are good is to
copy a very big file (e.g. a doublespace container file, or a very
large executable or archive).  It should be at least 5 megabytes, but
you can do multiple tests on smaller files.  Then do a COMP to verify
that the file copied properly.  (Turn off all caching when doing these
tests, otherwise you will test your RAM and not the files).  Then do
10 COMPs, comparing the same file on the SCSI hard drive, i.e. "COMP
realbig.doc realbig.doc".  Then do it after the computer gets warm.”h]”hX-  The best way to test if your cables, termination, etc. are good is to
copy a very big file (e.g. a doublespace container file, or a very
large executable or archive).  It should be at least 5 megabytes, but
you can do multiple tests on smaller files.  Then do a COMP to verify
that the file copied properly.  (Turn off all caching when doing these
tests, otherwise you will test your RAM and not the files).  Then do
10 COMPs, comparing the same file on the SCSI hard drive, i.e. â€œCOMP
realbig.doc realbig.docâ€.  Then do it after the computer gets warm.”…””}”(hj  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h KDhj  hžhubhÊ)”}”(hXâ  I noticed my system which seems to work 100% would fail this test if
the computer was left on for a few hours.  It was worse with longer
cables, and more devices on the SCSI bus.  What seems to happen is
that it gets a false ACK causing an extra byte to be inserted into the
stream (and this is not detected).  This can be caused by bad
termination (the ACK can be reflected), or by noise when the chips
work less well because of the heat, or when cables get too long for
the speed.”h]”hXâ  I noticed my system which seems to work 100% would fail this test if
the computer was left on for a few hours.  It was worse with longer
cables, and more devices on the SCSI bus.  What seems to happen is
that it gets a false ACK causing an extra byte to be inserted into the
stream (and this is not detected).  This can be caused by bad
termination (the ACK can be reflected), or by noise when the chips
work less well because of the heat, or when cables get too long for
the speed.”…””}”(hj"  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h KMhj  hžhubhÊ)”}”(hŒKRemember, if it doesn't work under DOS, it probably won't work under
Linux.”h]”hŒORemember, if it doesnâ€™t work under DOS, it probably wonâ€™t work under
Linux.”…””}”(hj0  hžhhŸNh Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hÉhŸh³h KVhj  hžhubeh}”(h]”Œ	important”ah ]”h"]”Œ	important”ah$]”h&]”uh1h´hh¶hžhhŸh³h KBubeh}”(h]”Œ!qlogic-fasxxx-family-driver-notes”ah ]”h"]”Œ!qlogic fasxxx family driver notes”ah$]”h&]”uh1h´hhhžhhŸh³h Kubeh}”(h]”h ]”h"]”h$]”h&]”Œsource”h³uh1hŒcurrent_source”NŒcurrent_line”NŒsettings”Œdocutils.frontend”ŒValues”“”)”}”(h¹NŒ	generator”NŒ	datestamp”NŒsource_link”NŒ
source_url”NŒtoc_backlinks”Œentry”Œfootnote_backlinks”KŒsectnum_xform”KŒstrip_comments”NŒstrip_elements_with_classes”NŒstrip_classes”NŒreport_level”KŒ
halt_level”KŒexit_status_level”KŒdebug”NŒwarning_stream”NŒ	traceback”ˆŒinput_encoding”Œ	utf-8-sig”Œinput_encoding_error_handler”Œstrict”Œoutput_encoding”Œutf-8”Œoutput_encoding_error_handler”jq  Œerror_encoding”Œutf-8”Œerror_encoding_error_handler”Œbackslashreplace”Œlanguage_code”Œen”Œrecord_dependencies”NŒconfig”NŒ	id_prefix”hŒauto_id_prefix”Œid”Œdump_settings”NŒdump_internals”NŒdump_transforms”NŒdump_pseudo_xml”NŒexpose_internals”NŒstrict_visitor”NŒ_disable_config”NŒ_source”h³Œ_destination”NŒ_config_files”]”Œ7/var/lib/git/docbuild/linux/Documentation/docutils.conf”aŒfile_insertion_enabled”ˆŒraw_enabled”KŒline_length_limit”M'Œpep_references”NŒpep_base_url”Œhttps://peps.python.org/”Œpep_file_url_template”Œpep-%04d”Œrfc_references”NŒrfc_base_url”Œ&https://datatracker.ietf.org/doc/html/”Œ	tab_width”KŒtrim_footnote_reference_space”‰Œsyntax_highlight”Œlong”Œsmart_quotes”ˆŒsmartquotes_locales”]”Œcharacter_level_inline_markup”‰Œdoctitle_xform”‰Œdocinfo_xform”KŒsectsubtitle_xform”‰Œimage_loading”Œlink”Œembed_stylesheet”‰Œcloak_email_addresses”ˆŒsection_self_link”‰Œenv”NubŒreporter”NŒindirect_targets”]”Œsubstitution_defs”}”Œsubstitution_names”}”Œrefnames”}”Œrefids”}”Œnameids”}”(jK  jH  j–  j“  jË  jÈ  j   jý  jC  j@  uŒ	nametypes”}”(jK  ‰j–  ‰jË  ‰j   ‰jC  ‰uh}”(jH  h¶j“  jd  jÈ  j™  jý  jÎ  j@  j  uŒfootnote_refs”}”Œcitation_refs”}”Œautofootnotes”]”Œautofootnote_refs”]”Œsymbol_footnotes”]”Œsymbol_footnote_refs”]”Œ	footnotes”]”Œ	citations”]”Œautofootnote_start”KŒsymbol_footnote_start”K Œ
id_counter”Œcollections”ŒCounter”“”}”…”R”Œparse_messages”]”Œtransform_messages”]”Œtransformer”NŒinclude_log”]”Œ
decoration”Nhžhub.