€•À2Œsphinx.addnodes”Œdocument”“”)”}”(Œ rawsource”Œ”Œchildren”]”(Œ translations”Œ LanguagesNode”“”)”}”(hhh]”(hŒ pending_xref”“”)”}”(hhh]”Œdocutils.nodes”ŒText”“”ŒChinese (Simplified)”…””}”Œparent”hsbaŒ attributes”}”(Œids”]”Œclasses”]”Œnames”]”Œdupnames”]”Œbackrefs”]”Œ refdomain”Œstd”Œreftype”Œdoc”Œ reftarget”Œ!/translations/zh_CN/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuŒtagname”hhh ubh)”}”(hhh]”hŒChinese (Traditional)”…””}”hh2sbah}”(h]”h ]”h"]”h$]”h&]”Œ refdomain”h)Œreftype”h+Œ reftarget”Œ!/translations/zh_TW/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuh1hhh ubh)”}”(hhh]”hŒItalian”…””}”hhFsbah}”(h]”h ]”h"]”h$]”h&]”Œ refdomain”h)Œreftype”h+Œ reftarget”Œ!/translations/it_IT/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuh1hhh ubh)”}”(hhh]”hŒJapanese”…””}”hhZsbah}”(h]”h ]”h"]”h$]”h&]”Œ refdomain”h)Œreftype”h+Œ reftarget”Œ!/translations/ja_JP/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuh1hhh ubh)”}”(hhh]”hŒKorean”…””}”hhnsbah}”(h]”h ]”h"]”h$]”h&]”Œ refdomain”h)Œreftype”h+Œ reftarget”Œ!/translations/ko_KR/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuh1hhh ubh)”}”(hhh]”hŒPortuguese (Brazilian)”…””}”hh‚sbah}”(h]”h ]”h"]”h$]”h&]”Œ refdomain”h)Œreftype”h+Œ reftarget”Œ!/translations/pt_BR/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuh1hhh ubh)”}”(hhh]”hŒSpanish”…””}”hh–sbah}”(h]”h ]”h"]”h$]”h&]”Œ refdomain”h)Œreftype”h+Œ reftarget”Œ!/translations/sp_SP/hwmon/ltc4260”Œmodname”NŒ classname”NŒ refexplicit”ˆuh1hhh ubeh}”(h]”h ]”h"]”h$]”h&]”Œcurrent_language”ŒEnglish”uh1h hhŒ _document”hŒsource”NŒline”NubhŒsection”“”)”}”(hhh]”(hŒtitle”“”)”}”(hŒKernel driver ltc4260”h]”hŒKernel driver ltc4260”…””}”(hh¼h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hºhh·h²hh³Œ;/var/lib/git/docbuild/linux/Documentation/hwmon/ltc4260.rst”h´KubhŒ paragraph”“”)”}”(hŒSupported chips:”h]”hŒSupported chips:”…””}”(hhÍh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´Khh·h²hubhŒ block_quote”“”)”}”(hŒ‘* Linear Technology LTC4260 Prefix: 'ltc4260' Addresses scanned: - Datasheet: http://cds.linear.com/docs/en/datasheet/4260fc.pdf ”h]”hŒ bullet_list”“”)”}”(hhh]”hŒ list_item”“”)”}”(hŒ‡Linear Technology LTC4260 Prefix: 'ltc4260' Addresses scanned: - Datasheet: http://cds.linear.com/docs/en/datasheet/4260fc.pdf ”h]”(hÌ)”}”(hŒLinear Technology LTC4260”h]”hŒLinear Technology LTC4260”…””}”(hhìh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´KhhèubhÌ)”}”(hŒPrefix: 'ltc4260'”h]”hŒPrefix: ‘ltc4260’”…””}”(hhúh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´KhhèubhÌ)”}”(hŒAddresses scanned: -”h]”hŒAddresses scanned: -”…””}”(hjh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K hhèubhÌ)”}”(hŒ Datasheet:”h]”hŒ Datasheet:”…””}”(hjh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K hhèubhÜ)”}”(hŒ3http://cds.linear.com/docs/en/datasheet/4260fc.pdf ”h]”hÌ)”}”(hŒ2http://cds.linear.com/docs/en/datasheet/4260fc.pdf”h]”hŒ reference”“”)”}”(hj*h]”hŒ2http://cds.linear.com/docs/en/datasheet/4260fc.pdf”…””}”(hj.h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”Œrefuri”j*uh1j,hj(ubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´Khj$ubah}”(h]”h ]”h"]”h$]”h&]”uh1hÛh³hÊh´Khhèubeh}”(h]”h ]”h"]”h$]”h&]”uh1hæhhãubah}”(h]”h ]”h"]”h$]”h&]”Œbullet”Œ*”uh1háh³hÊh´KhhÝubah}”(h]”h ]”h"]”h$]”h&]”uh1hÛh³hÊh´Khh·h²hubhÌ)”}”(hŒ*Author: Guenter Roeck ”h]”(hŒAuthor: Guenter Roeck <”…””}”(hj\h²hh³Nh´Nubj-)”}”(hŒlinux@roeck-us.net”h]”hŒlinux@roeck-us.net”…””}”(hjdh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”Œrefuri”Œmailto:linux@roeck-us.net”uh1j,hj\ubhŒ>”…””}”(hj\h²hh³Nh´Nubeh}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´Khh·h²hubh¶)”}”(hhh]”(h»)”}”(hŒ Description”h]”hŒ Description”…””}”(hjh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hºhj~h²hh³hÊh´KubhÌ)”}”(hŒgThe LTC4260 Hot Swap controller allows a board to be safely inserted and removed from a live backplane.”h]”hŒgThe LTC4260 Hot Swap controller allows a board to be safely inserted and removed from a live backplane.”…””}”(hjh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´Khj~h²hubeh}”(h]”Œ description”ah ]”h"]”Œ description”ah$]”h&]”uh1hµhh·h²hh³hÊh´Kubh¶)”}”(hhh]”(h»)”}”(hŒ Usage Notes”h]”hŒ Usage Notes”…””}”(hj¨h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hºhj¥h²hh³hÊh´KubhÌ)”}”(hŒ®This driver does not probe for LTC4260 devices, since there is no register which can be safely used to identify the chip. You will have to instantiate the devices explicitly.”h]”hŒ®This driver does not probe for LTC4260 devices, since there is no register which can be safely used to identify the chip. You will have to instantiate the devices explicitly.”…””}”(hj¶h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´Khj¥h²hubhÌ)”}”(hŒZExample: the following will load the driver for an LTC4260 at address 0x10 on I2C bus #1::”h]”hŒYExample: the following will load the driver for an LTC4260 at address 0x10 on I2C bus #1:”…””}”(hjÄh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K!hj¥h²hubhŒ literal_block”“”)”}”(hŒN$ modprobe ltc4260 $ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device”h]”hŒN$ modprobe ltc4260 $ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device”…””}”hjÔsbah}”(h]”h ]”h"]”h$]”h&]”Œ xml:space”Œpreserve”uh1jÒh³hÊh´K$hj¥h²hubeh}”(h]”Œ usage-notes”ah ]”h"]”Œ usage notes”ah$]”h&]”uh1hµhh·h²hh³hÊh´Kubh¶)”}”(hhh]”(h»)”}”(hŒ Sysfs entries”h]”hŒ Sysfs entries”…””}”(hjïh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hºhjìh²hh³hÊh´K)ubhÌ)”}”(hXbVoltage readings provided by this driver are reported as obtained from the ADC registers. If a set of voltage divider resistors is installed, calculate the real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the value of the divider resistor against the measured voltage and R2 is the value of the divider resistor against Ground.”h]”hXbVoltage readings provided by this driver are reported as obtained from the ADC registers. If a set of voltage divider resistors is installed, calculate the real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the value of the divider resistor against the measured voltage and R2 is the value of the divider resistor against Ground.”…””}”(hjýh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K+hjìh²hubhÌ)”}”(hX5Current reading provided by this driver is reported as obtained from the ADC Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. If a different sense resistor is installed, calculate the real current by dividing the reported value by the sense resistor value in mOhm.”h]”hX5Current reading provided by this driver is reported as obtained from the ADC Current Sense register. The reported value assumes that a 1 mOhm sense resistor is installed. If a different sense resistor is installed, calculate the real current by dividing the reported value by the sense resistor value in mOhm.”…””}”(hj h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K1hjìh²hubhŒtable”“”)”}”(hhh]”hŒtgroup”“”)”}”(hhh]”(hŒcolspec”“”)”}”(hhh]”h}”(h]”h ]”h"]”h$]”h&]”Œcolwidth”Kuh1j#hj ubj$)”}”(hhh]”h}”(h]”h ]”h"]”h$]”h&]”Œcolwidth”Kuh1j#hj ubhŒtbody”“”)”}”(hhh]”(hŒrow”“”)”}”(hhh]”(hŒentry”“”)”}”(hhh]”hÌ)”}”(hŒ in1_input”h]”hŒ in1_input”…””}”(hjHh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K7hjEubah}”(h]”h ]”h"]”h$]”h&]”uh1jChj@ubjD)”}”(hhh]”hÌ)”}”(hŒSOURCE voltage (mV)”h]”hŒSOURCE voltage (mV)”…””}”(hj_h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K7hj\ubah}”(h]”h ]”h"]”h$]”h&]”uh1jChj@ubeh}”(h]”h ]”h"]”h$]”h&]”uh1j>hj;ubj?)”}”(hhh]”(jD)”}”(hhh]”hÌ)”}”(hŒ in1_min_alarm”h]”hŒ in1_min_alarm”…””}”(hjh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K8hj|ubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjyubjD)”}”(hhh]”hÌ)”}”(hŒUndervoltage alarm”h]”hŒUndervoltage alarm”…””}”(hj–h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K8hj“ubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjyubeh}”(h]”h ]”h"]”h$]”h&]”uh1j>hj;ubj?)”}”(hhh]”(jD)”}”(hhh]”hÌ)”}”(hŒ in1_max_alarm”h]”hŒ in1_max_alarm”…””}”(hj¶h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K9hj³ubah}”(h]”h ]”h"]”h$]”h&]”uh1jChj°ubjD)”}”(hhh]”hÌ)”}”(hŒOvervoltage alarm”h]”hŒOvervoltage alarm”…””}”(hjÍh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K9hjÊubah}”(h]”h ]”h"]”h$]”h&]”uh1jChj°ubeh}”(h]”h ]”h"]”h$]”h&]”uh1j>hj;ubj?)”}”(hhh]”(jD)”}”(hhh]”hÌ)”}”(hŒ in2_input”h]”hŒ in2_input”…””}”(hjíh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K;hjêubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjçubjD)”}”(hhh]”hÌ)”}”(hŒADIN voltage (mV)”h]”hŒADIN voltage (mV)”…””}”(hjh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K;hjubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjçubeh}”(h]”h ]”h"]”h$]”h&]”uh1j>hj;ubj?)”}”(hhh]”(jD)”}”(hhh]”hÌ)”}”(hŒ in2_alarm”h]”hŒ in2_alarm”…””}”(hj$h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´Khj;ubj?)”}”(hhh]”(jD)”}”(hhh]”hÌ)”}”(hŒ curr1_input”h]”hŒ curr1_input”…””}”(hj[h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K>hjXubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjUubjD)”}”(hhh]”hÌ)”}”(hŒSENSE current (mA)”h]”hŒSENSE current (mA)”…””}”(hjrh²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K>hjoubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjUubeh}”(h]”h ]”h"]”h$]”h&]”uh1j>hj;ubj?)”}”(hhh]”(jD)”}”(hhh]”hÌ)”}”(hŒ curr1_alarm”h]”hŒ curr1_alarm”…””}”(hj’h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K?hjubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjŒubjD)”}”(hhh]”hÌ)”}”(hŒSENSE overcurrent alarm”h]”hŒSENSE overcurrent alarm”…””}”(hj©h²hh³Nh´Nubah}”(h]”h ]”h"]”h$]”h&]”uh1hËh³hÊh´K?hj¦ubah}”(h]”h ]”h"]”h$]”h&]”uh1jChjŒubeh}”(h]”h ]”h"]”h$]”h&]”uh1j>hj;ubeh}”(h]”h ]”h"]”h$]”h&]”uh1j9hj ubeh}”(h]”h ]”h"]”h$]”h&]”Œcols”Kuh1jhjubah}”(h]”h ]”h"]”h$]”h&]”uh1jhjìh²hh³hÊh´Nubeh}”(h]”Œ sysfs-entries”ah ]”h"]”Œ sysfs entries”ah$]”h&]”uh1hµhh·h²hh³hÊh´K)ubeh}”(h]”Œkernel-driver-ltc4260”ah ]”h"]”Œkernel driver ltc4260”ah$]”h&]”uh1hµhhh²hh³hÊh´Kubeh}”(h]”h ]”h"]”h$]”h&]”Œsource”hÊuh1hŒcurrent_source”NŒ current_line”NŒsettings”Œdocutils.frontend”ŒValues”“”)”}”(hºNŒ generator”NŒ datestamp”NŒ source_link”NŒ source_url”NŒ toc_backlinks”jCŒfootnote_backlinks”KŒ sectnum_xform”KŒstrip_comments”NŒstrip_elements_with_classes”NŒ strip_classes”NŒ report_level”KŒ halt_level”KŒexit_status_level”KŒdebug”NŒwarning_stream”NŒ traceback”ˆŒinput_encoding”Œ utf-8-sig”Œinput_encoding_error_handler”Œstrict”Œoutput_encoding”Œutf-8”Œoutput_encoding_error_handler”jŒerror_encoding”Œutf-8”Œerror_encoding_error_handler”Œbackslashreplace”Œ language_code”Œen”Œrecord_dependencies”NŒconfig”NŒ id_prefix”hŒauto_id_prefix”Œid”Œ dump_settings”NŒdump_internals”NŒdump_transforms”NŒdump_pseudo_xml”NŒexpose_internals”NŒstrict_visitor”NŒ_disable_config”NŒ_source”hÊŒ _destination”NŒ _config_files”]”Œ7/var/lib/git/docbuild/linux/Documentation/docutils.conf”aŒfile_insertion_enabled”ˆŒ raw_enabled”KŒline_length_limit”M'Œpep_references”NŒ pep_base_url”Œhttps://peps.python.org/”Œpep_file_url_template”Œpep-%04d”Œrfc_references”NŒ rfc_base_url”Œ&https://datatracker.ietf.org/doc/html/”Œ tab_width”KŒtrim_footnote_reference_space”‰Œsyntax_highlight”Œlong”Œ smart_quotes”ˆŒsmartquotes_locales”]”Œcharacter_level_inline_markup”‰Œdoctitle_xform”‰Œ docinfo_xform”KŒsectsubtitle_xform”‰Œ image_loading”Œlink”Œembed_stylesheet”‰Œcloak_email_addresses”ˆŒsection_self_link”‰Œenv”NubŒreporter”NŒindirect_targets”]”Œsubstitution_defs”}”Œsubstitution_names”}”Œrefnames”}”Œrefids”}”Œnameids”}”(jãjàj¢jŸjéjæjÛjØuŒ nametypes”}”(jã‰j¢‰jé‰jÛ‰uh}”(jàh·jŸj~jæj¥jØjìuŒ footnote_refs”}”Œ citation_refs”}”Œ autofootnotes”]”Œautofootnote_refs”]”Œsymbol_footnotes”]”Œsymbol_footnote_refs”]”Œ footnotes”]”Œ citations”]”Œautofootnote_start”KŒsymbol_footnote_start”KŒ id_counter”Œ collections”ŒCounter”“”}”…”R”Œparse_messages”]”Œtransform_messages”]”Œ transformer”NŒ include_log”]”Œ decoration”Nh²hub.