KVM-specific MSRs. Glauber Costa , Red Hat Inc, 2010 ===================================================== KVM makes use of some custom MSRs to service some requests. Custom MSRs have a range reserved for them, that goes from 0x4b564d00 to 0x4b564dff. There are MSRs outside this area, but they are deprecated and their use is discouraged. Custom MSR list -------- The current supported Custom MSR list is: MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00 data: 4-byte alignment physical address of a memory area which must be in guest RAM. This memory is expected to hold a copy of the following structure: struct pvclock_wall_clock { u32 version; u32 sec; u32 nsec; } __attribute__((__packed__)); whose data will be filled in by the hypervisor. The hypervisor is only guaranteed to update this data at the moment of MSR write. Users that want to reliably query this information more than once have to write more than once to this MSR. Fields have the following meanings: version: guest has to check version before and after grabbing time information and check that they are both equal and even. An odd version indicates an in-progress update. sec: number of seconds for wallclock at time of boot. nsec: number of nanoseconds for wallclock at time of boot. In order to get the current wallclock time, the system_time from MSR_KVM_SYSTEM_TIME_NEW needs to be added. Note that although MSRs are per-CPU entities, the effect of this particular MSR is global. Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid leaf prior to usage. MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01 data: 4-byte aligned physical address of a memory area which must be in guest RAM, plus an enable bit in bit 0. This memory is expected to hold a copy of the following structure: struct pvclock_vcpu_time_info { u32 version; u32 pad0; u64 tsc_timestamp; u64 system_time; u32 tsc_to_system_mul; s8 tsc_shift; u8 flags; u8 pad[2]; } __attribute__((__packed__)); /* 32 bytes */ whose data will be filled in by the hypervisor periodically. Only one write, or registration, is needed for each VCPU. The interval between updates of this structure is arbitrary and implementation-dependent. The hypervisor may update this structure at any time it sees fit until anything with bit0 == 0 is written to it. Fields have the following meanings: version: guest has to check version before and after grabbing time information and check that they are both equal and even. An odd version indicates an in-progress update. tsc_timestamp: the tsc value at the current VCPU at the time of the update of this structure. Guests can subtract this value from current tsc to derive a notion of elapsed time since the structure update. system_time: a host notion of monotonic time, including sleep time at the time this structure was last updated. Unit is nanoseconds. tsc_to_system_mul: multiplier to be used when converting tsc-related quantity to nanoseconds tsc_shift: shift to be used when converting tsc-related quantity to nanoseconds. This shift will ensure that multiplication with tsc_to_system_mul does not overflow. A positive value denotes a left shift, a negative value a right shift. The conversion from tsc to nanoseconds involves an additional right shift by 32 bits. With this information, guests can derive per-CPU time by doing: time = (current_tsc - tsc_timestamp) if (tsc_shift >= 0) time <<= tsc_shift; else time >>= -tsc_shift; time = (time * tsc_to_system_mul) >> 32 time = time + system_time flags: bits in this field indicate extended capabilities coordinated between the guest and the hypervisor. Availability of specific flags has to be checked in 0x40000001 cpuid leaf. Current flags are: flag bit | cpuid bit | meaning ------------------------------------------------------------- | | time measures taken across 0 | 24 | multiple cpus are guaranteed to | | be monotonic ------------------------------------------------------------- | | guest vcpu has been paused by 1 | N/A | the host | | See 4.70 in api.txt ------------------------------------------------------------- Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid leaf prior to usage. MSR_KVM_WALL_CLOCK: 0x11 data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead. This MSR falls outside the reserved KVM range and may be removed in the future. Its usage is deprecated. Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid leaf prior to usage. MSR_KVM_SYSTEM_TIME: 0x12 data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead. This MSR falls outside the reserved KVM range and may be removed in the future. Its usage is deprecated. Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid leaf prior to usage. The suggested algorithm for detecting kvmclock presence is then: if (!kvm_para_available()) /* refer to cpuid.txt */ return NON_PRESENT; flags = cpuid_eax(0x40000001); if (flags & 3) { msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW; msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW; return PRESENT; } else if (flags & 0) { msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; return PRESENT; } else return NON_PRESENT; MSR_KVM_ASYNC_PF_EN: 0x4b564d02 data: Bits 63-6 hold 64-byte aligned physical address of a 64 byte memory area which must be in guest RAM and must be zeroed. Bits 5-3 are reserved and should be zero. Bit 0 is 1 when asynchronous page faults are enabled on the vcpu 0 when disabled. Bit 1 is 1 if asynchronous page faults can be injected when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults are delivered to L1 as #PF vmexits. Bit 2 can be set only if KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID. First 4 byte of 64 byte memory location will be written to by the hypervisor at the time of asynchronous page fault (APF) injection to indicate type of asynchronous page fault. Value of 1 means that the page referred to by the page fault is not present. Value 2 means that the page is now available. Disabling interrupt inhibits APFs. Guest must not enable interrupt before the reason is read, or it may be overwritten by another APF. Since APF uses the same exception vector as regular page fault guest must reset the reason to 0 before it does something that can generate normal page fault. If during page fault APF reason is 0 it means that this is regular page fault. During delivery of type 1 APF cr2 contains a token that will be used to notify a guest when missing page becomes available. When page becomes available type 2 APF is sent with cr2 set to the token associated with the page. There is special kind of token 0xffffffff which tells vcpu that it should wake up all processes waiting for APFs and no individual type 2 APFs will be sent. If APF is disabled while there are outstanding APFs, they will not be delivered. Currently type 2 APF will be always delivered on the same vcpu as type 1 was, but guest should not rely on that. MSR_KVM_STEAL_TIME: 0x4b564d03 data: 64-byte alignment physical address of a memory area which must be in guest RAM, plus an enable bit in bit 0. This memory is expected to hold a copy of the following structure: struct kvm_steal_time { __u64 steal; __u32 version; __u32 flags; __u8 preempted; __u8 u8_pad[3]; __u32 pad[11]; } whose data will be filled in by the hypervisor periodically. Only one write, or registration, is needed for each VCPU. The interval between updates of this structure is arbitrary and implementation-dependent. The hypervisor may update this structure at any time it sees fit until anything with bit0 == 0 is written to it. Guest is required to make sure this structure is initialized to zero. Fields have the following meanings: version: a sequence counter. In other words, guest has to check this field before and after grabbing time information and make sure they are both equal and even. An odd version indicates an in-progress update. flags: At this point, always zero. May be used to indicate changes in this structure in the future. steal: the amount of time in which this vCPU did not run, in nanoseconds. Time during which the vcpu is idle, will not be reported as steal time. preempted: indicate the vCPU who owns this struct is running or not. Non-zero values mean the vCPU has been preempted. Zero means the vCPU is not preempted. NOTE, it is always zero if the the hypervisor doesn't support this field. MSR_KVM_EOI_EN: 0x4b564d04 data: Bit 0 is 1 when PV end of interrupt is enabled on the vcpu; 0 when disabled. Bit 1 is reserved and must be zero. When PV end of interrupt is enabled (bit 0 set), bits 63-2 hold a 4-byte aligned physical address of a 4 byte memory area which must be in guest RAM and must be zeroed. The first, least significant bit of 4 byte memory location will be written to by the hypervisor, typically at the time of interrupt injection. Value of 1 means that guest can skip writing EOI to the apic (using MSR or MMIO write); instead, it is sufficient to signal EOI by clearing the bit in guest memory - this location will later be polled by the hypervisor. Value of 0 means that the EOI write is required. It is always safe for the guest to ignore the optimization and perform the APIC EOI write anyway. Hypervisor is guaranteed to only modify this least significant bit while in the current VCPU context, this means that guest does not need to use either lock prefix or memory ordering primitives to synchronise with the hypervisor. However, hypervisor can set and clear this memory bit at any time: therefore to make sure hypervisor does not interrupt the guest and clear the least significant bit in the memory area in the window between guest testing it to detect whether it can skip EOI apic write and between guest clearing it to signal EOI to the hypervisor, guest must both read the least significant bit in the memory area and clear it using a single CPU instruction, such as test and clear, or compare and exchange. MSR_KVM_POLL_CONTROL: 0x4b564d05 Control host-side polling. data: Bit 0 enables (1) or disables (0) host-side HLT polling logic. KVM guests can request the host not to poll on HLT, for example if they are performing polling themselves.