Kernel driver i2c-sis630 Supported adapters: * Silicon Integrated Systems Corp (SiS) 630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux) 730 chipset 964 chipset * Possible other SiS chipsets ? Author: Alexander Malysh Amaury Decrême - SiS964 support Module Parameters ----------------- * force = [1|0] Forcibly enable the SIS630. DANGEROUS! This can be interesting for chipsets not named above to check if it works for you chipset, but DANGEROUS! * high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default, what your BIOS use). DANGEROUS! This should be a bit faster, but freeze some systems (i.e. my Laptop). SIS630/730 chip only. Description ----------- This SMBus only driver is known to work on motherboards with the above named chipsets. If you see something like this: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 or like this: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 or like this: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 02) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] LPC Controller (rev 36) in your 'lspci' output , then this driver is for your chipset. Thank You --------- Philip Edelbrock - testing SiS730 support Mark M. Hoffman - bug fixes To anyone else which I forgot here ;), thanks!