Kernel driver ina3221 ===================== Supported chips: * Texas Instruments INA3221 Prefix: 'ina3221' Addresses: I2C 0x40 - 0x43 Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/ Author: Andrew F. Davis Description ----------- The Texas Instruments INA3221 monitors voltage, current, and power on the high side of up to three D.C. power supplies. The INA3221 monitors both shunt drop and supply voltage, with programmable conversion times and averaging, current and power are calculated host-side from these. Sysfs entries ------------- in[123]_label Voltage channel labels in[123]_enable Voltage channel enable controls in[123]_input Bus voltage(mV) channels curr[123]_input Current(mA) measurement channels shunt[123]_resistor Shunt resistance(uOhm) channels curr[123]_crit Critical alert current(mA) setting, activates the corresponding alarm when the respective current is above this value curr[123]_crit_alarm Critical alert current limit exceeded curr[123]_max Warning alert current(mA) setting, activates the corresponding alarm when the respective current average is above this value. curr[123]_max_alarm Warning alert current limit exceeded in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively