* Microchip PIC32 Deadman Timer The deadman timer is used to reset the processor in the event of a software malfunction. It is a free-running instruction fetch timer, which is clocked whenever an instruction fetch occurs until a count match occurs. Required properties: - compatible: must be "microchip,pic32mzda-dmt". - reg: physical base address of the controller and length of memory mapped region. - clocks: phandle of source clk. Should be <&rootclk PB7CLK>. Example: watchdog@1f800a00 { compatible = "microchip,pic32mzda-dmt"; reg = <0x1f800a00 0x80>; clocks = <&rootclk PB7CLK>; };