* OHCI controller, NXP ohci-nxp variant Required properties: - compatible: must be "nxp,ohci-nxp" - reg: physical base address of the controller and length of memory mapped region. - interrupts: The OHCI interrupt - transceiver: phandle of the associated ISP1301 device - this is necessary for the UDC controller for connecting to the USB physical layer Example (LPC32xx): isp1301: usb-transceiver@2c { compatible = "nxp,isp1301"; reg = <0x2c>; }; ohci@31020000 { compatible = "nxp,ohci-nxp"; reg = <0x31020000 0x300>; interrupt-parent = <&mic>; interrupts = <0x3b 0>; transceiver = <&isp1301>; };