* Marvell PXA/MMP EHCI controller. Required properties: - compatible: must be "marvell,pxau2o-ehci" - reg: physical base addresses of the controller and length of memory mapped region - interrupts: one EHCI controller interrupt should be described here - clocks: phandle list of usb clocks - clock-names: should be "USBCLK" - phys: phandle for the PHY device - phy-names: should be "usb" Example: ehci0: usb-ehci@d4208000 { compatible = "marvell,pxau2o-ehci"; reg = <0xd4208000 0x200>; interrupts = <44>; clocks = <&soc_clocks MMP2_CLK_USB>; clock-names = "USBCLK"; phys = <&usb_otg_phy>; phy-names = "usb"; };