Broadcom USB Device Controller (BDC) ==================================== Required properties: - compatible: must be one of: "brcm,bdc-udc-v2" "brcm,bdc" - reg: the base register address and length - interrupts: the interrupt line for this controller Optional properties: On Broadcom STB platforms, these properties are required: - phys: phandle to one or two USB PHY blocks NOTE: Some SoC's have a single phy and some have USB 2.0 and USB 3.0 phys - clocks: phandle to the functional clock of this block Example: bdc@f0b02000 { compatible = "brcm,bdc-udc-v2"; reg = <0xf0b02000 0xfc4>; interrupts = <0x0 0x60 0x0>; phys = <&usbphy_0 0x0>; clocks = <&sw_usbd>; };