# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: I²C-attached Trusted Platform Module conforming to TCG TIS specification maintainers: - Lukas Wunner description: | The Trusted Computing Group (TCG) has defined a multi-vendor standard for accessing a TPM chip. It can be transported over various buses, one of them being I²C. The standard is named: TCG PC Client Specific TPM Interface Specification (TIS) https://trustedcomputinggroup.org/resource/pc-client-work-group-pc-client-specific-tpm-interface-specification-tis/ The I²C interface was not originally part of the standard, but added in 2017 with a separate document: TCG PC Client Platform TPM Profile Specification for TPM 2.0 (PTP) https://trustedcomputinggroup.org/resource/pc-client-platform-tpm-profile-ptp-specification/ Recent TPM 2.0 chips conform to this generic interface, others use a vendor-specific I²C interface. properties: compatible: oneOf: - description: Generic TPM 2.0 chips conforming to TCG PTP interface items: - enum: - infineon,slb9673 - nuvoton,npct75x - const: tcg,tpm-tis-i2c - description: TPM 1.2 and 2.0 chips with vendor-specific I²C interface items: - enum: - atmel,at97sc3204t # TPM 1.2 - infineon,slb9635tt # TPM 1.2 (maximum 100 kHz) - infineon,slb9645tt # TPM 1.2 (maximum 400 kHz) - infineon,tpm_i2c_infineon # TPM 1.2 - nuvoton,npct501 # TPM 1.2 - nuvoton,npct601 # TPM 2.0 - st,st33zp24-i2c # TPM 2.0 - winbond,wpct301 # TPM 1.2 reg: description: address of TPM on the I²C bus allOf: - $ref: tpm-common.yaml# required: - compatible - reg unevaluatedProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; tpm@57 { label = "tpm"; compatible = "nuvoton,npct601"; reg = <0x57>; linux,sml-base = <0x7f 0xfd450000>; linux,sml-size = <0x10000>; }; }; - | #include #include i2c { #address-cells = <1>; #size-cells = <0>; tpm@13 { reg = <0x13>; compatible = "st,st33zp24-i2c"; interrupt-parent = <&gpio5>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; }; };