# SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- $id: http://devicetree.org/schemas/timer/nvidia,tegra-timer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NVIDIA Tegra timer maintainers: - Stephen Warren allOf: - if: properties: compatible: contains: const: nvidia,tegra210-timer then: properties: interrupts: # Either a single combined interrupt or up to 14 individual interrupts minItems: 1 maxItems: 14 description: > A list of 14 interrupts; one per each timer channels 0 through 13 - if: properties: compatible: oneOf: - items: - enum: - nvidia,tegra114-timer - nvidia,tegra124-timer - nvidia,tegra132-timer - const: nvidia,tegra30-timer - items: - const: nvidia,tegra30-timer - const: nvidia,tegra20-timer then: properties: interrupts: # Either a single combined interrupt or up to 6 individual interrupts minItems: 1 maxItems: 6 description: > A list of 6 interrupts; one per each of timer channels 1 through 5, and one for the shared interrupt for the remaining channels. - if: properties: compatible: const: nvidia,tegra20-timer then: properties: interrupts: # Either a single combined interrupt or up to 4 individual interrupts minItems: 1 maxItems: 4 description: | A list of 4 interrupts; one per timer channel. properties: compatible: oneOf: - const: nvidia,tegra210-timer description: > The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock (TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic, or watchdog interrupts. - items: - enum: - nvidia,tegra114-timer - nvidia,tegra124-timer - nvidia,tegra132-timer - const: nvidia,tegra30-timer - items: - const: nvidia,tegra30-timer - const: nvidia,tegra20-timer description: > The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free running counter, and 5 watchdog modules. The first two channels may also trigger a legacy watchdog reset. - const: nvidia,tegra20-timer description: > The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free running counter. The first two channels may also trigger a watchdog reset. reg: maxItems: 1 interrupts: true clocks: maxItems: 1 clock-names: items: - const: timer required: - compatible - reg - interrupts - clocks additionalProperties: false examples: - | #include timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 41 IRQ_TYPE_LEVEL_HIGH>, <0 42 IRQ_TYPE_LEVEL_HIGH>, <0 121 IRQ_TYPE_LEVEL_HIGH>, <0 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car 214>; }; - | #include #include #include timer@60005000 { compatible = "nvidia,tegra210-timer"; reg = <0x60005000 0x400>; interrupts = , , , , , , , , , , , , , ; clocks = <&tegra_car TEGRA210_CLK_TIMER>; clock-names = "timer"; };