* Renesas R-Car Thermal Required properties: - compatible : "renesas,thermal-", "renesas,rcar-gen2-thermal" (with thermal-zone) or "renesas,rcar-thermal" (without thermal-zone) as fallback except R-Car V3M/E3/D3 and RZ/G2E. Examples with soctypes are: - "renesas,thermal-r8a73a4" (R-Mobile APE6) - "renesas,thermal-r8a7743" (RZ/G1M) - "renesas,thermal-r8a7744" (RZ/G1N) - "renesas,thermal-r8a774c0" (RZ/G2E) - "renesas,thermal-r8a7779" (R-Car H1) - "renesas,thermal-r8a7790" (R-Car H2) - "renesas,thermal-r8a7791" (R-Car M2-W) - "renesas,thermal-r8a7792" (R-Car V2H) - "renesas,thermal-r8a7793" (R-Car M2-N) - "renesas,thermal-r8a77970" (R-Car V3M) - "renesas,thermal-r8a77990" (R-Car E3) - "renesas,thermal-r8a77995" (R-Car D3) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". Option properties: - interrupts : If present should contain 3 interrupts for R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise. Example (non interrupt support): thermal@ffc48000 { compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; }; Example (interrupt support): thermal@e61f0000 { compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0xe61f0000 0x14 0xe61f0100 0x38 0xe61f0200 0x38 0xe61f0300 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; Example (with thermal-zone): thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&thermal>; trips { cpu-crit { temperature = <115000>; hysteresis = <0>; type = "critical"; }; }; cooling-maps { }; }; }; thermal: thermal@e61f0000 { compatible = "renesas,thermal-r8a7790", "renesas,rcar-gen2-thermal", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; power-domains = <&cpg_clocks>; #thermal-sensor-cells = <0>; };