# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/marvell,armada-ap806-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Marvell Armada AP80x/CP110 thermal management

maintainers:
  - Miquel Raynal <miquel.raynal@bootlin.com>

properties:
  compatible:
    enum:
      - marvell,armada-ap806-thermal
      - marvell,armada-ap807-thermal
      - marvell,armada-cp110-thermal

  reg:
    maxItems: 1

  interrupts:
    description:
      Overheat interrupt. The interrupt is connected thru a System Error
      Interrupt (SEI) controller.
    maxItems: 1

  '#thermal-sensor-cells':
    description: Cell represents the channel ID. There is one sensor per
      channel. O refers to the thermal IP internal channel.
    const: 1

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    thermal-sensor@80 {
        compatible = "marvell,armada-ap806-thermal";
        reg = <0x80 0x10>;
        interrupts = <18>;
        #thermal-sensor-cells = <1>;
    };