# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/thermal/generic-adc-thermal.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: General Purpose Analog To Digital Converter (ADC) based thermal sensor maintainers: - Laxman Dewangan description: On some of platforms, thermal sensor like thermistors are connected to one of ADC channel and sensor resistance is read via voltage across the sensor resistor. The voltage read across the sensor is mapped to temperature using voltage-temperature lookup table. properties: compatible: const: generic-adc-thermal '#thermal-sensor-cells': const: 0 io-channels: maxItems: 1 io-channel-names: const: sensor-channel temperature-lookup-table: description: | Lookup table to map the relation between ADC value and temperature. When ADC is read, the value is looked up on the table to get the equivalent temperature. If not specified, driver assumes the ADC channel gives milliCelsius directly. $ref: /schemas/types.yaml#/definitions/int32-matrix items: items: - description: Temperature in milliCelsius - description: ADC read value required: - compatible - '#thermal-sensor-cells' - io-channels - io-channel-names additionalProperties: false examples: - | #include thermal-sensor { compatible = "generic-adc-thermal"; #thermal-sensor-cells = <0>; io-channels = <&ads1015 1>; io-channel-names = "sensor-channel"; temperature-lookup-table = < (-40000) 2578 (-39000) 2577 (-38000) 2576 (-37000) 2575 (-36000) 2574 (-35000) 2573 (-34000) 2572 (-33000) 2571 (-32000) 2569 (-31000) 2568 (-30000) 2567 /* skip */ 118000 254 119000 247 120000 240 121000 233 122000 226 123000 220 124000 214 125000 208>; }; ...