* Socionext Synquacer HS-SPI bindings Required Properties: - compatible: should be "socionext,synquacer-spi" - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts. - clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK) - clock-names: Shall be "iHCLK" and "iPCLK" respectively Optional Properties: - socionext,use-rtm: boolean, if required to use "retimed clock" for RX - socionext,set-aces: boolean, if same active clock edges field to be set. Example: spi0: spi@ff110000 { compatible = "socionext,synquacer-spi"; reg = <0xff110000 0x1000>; interrupts = , , ; clocks = <&clk_hsspi>; clock-names = "iHCLK"; socionext,use-rtm; socionext,set-aces; };