# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller maintainers: - Peter Griffin description: | This binding describes a reset controller device that is used to enable and disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in the STi family SoC system configuration registers. The actual action taken when softreset is asserted is hardware dependent. However, when asserted it may not be possible to access the hardware's registers and after an assert/deassert sequence the hardware's previous state may no longer be valid. properties: compatible: const: st,stih407-picophyreset '#reset-cells': const: 1 required: - compatible - '#reset-cells' additionalProperties: false examples: - | #include picophyreset: picophyreset-controller { compatible = "st,stih407-picophyreset"; #reset-cells = <1>; }; // Specifying picophyreset control of devices usb2_picophy0: usbpicophy { resets = <&picophyreset STIH407_PICOPHY0_RESET>; };