Nuvoton NPCM Reset controller Required properties: - compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC - reg : specifies physical base address and size of the register. - #reset-cells: must be set to 2 Optional property: - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. NPCM7xx contain four software reset that represent numbers 1 to 4. If 'nuvoton,sw-reset-number' is not specified software reset is disabled. Example: rstc: rstc@f0801000 { compatible = "nuvoton,npcm750-reset"; reg = <0xf0801000 0x70>; #reset-cells = <2>; nuvoton,sw-reset-number = <2>; }; Specifying reset lines connected to IP NPCM7XX modules ====================================================== example: spi0: spi@..... { ... resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; ... }; The index could be found in .