STM32MP1 PWR Regulators ----------------------- Available Regulators in STM32MP1 PWR block are: - reg11 for regulator 1V1 - reg18 for regulator 1V8 - usb33 for the swtich USB3V3 Required properties: - compatible: Must be "st,stm32mp1,pwr-reg" - list of child nodes that specify the regulator reg11, reg18 or usb33 initialization data for defined regulators. The definition for each of these nodes is defined using the standard binding for regulators found at Documentation/devicetree/bindings/regulator/regulator.txt. - vdd-supply: phandle to the parent supply/regulator node for vdd input - vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33 Example: pwr_regulators: pwr@50001000 { compatible = "st,stm32mp1,pwr-reg"; reg = <0x50001000 0x10>; vdd-supply = <&vdd>; vdd_3v3_usbfs-supply = <&vdd_usb>; reg11: reg11 { regulator-name = "reg11"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; reg18: reg18 { regulator-name = "reg18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; usb33: usb33 { regulator-name = "usb33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; };