# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Silicon Mitus SM5703 multi function device regulators maintainers: - Markuss Broks description: | SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml Regulator nodes should be named as USBLDO_, BUCK, VBUS, LDO_. The definition for each of these nodes is defined using the standard binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. properties: buck: type: object $ref: regulator.yaml# unevaluatedProperties: false description: Properties for the BUCK regulator. vbus: type: object $ref: regulator.yaml# unevaluatedProperties: false description: Properties for the VBUS regulator. patternProperties: "^ldo[1-3]$": type: object $ref: regulator.yaml# unevaluatedProperties: false description: Properties for single LDO regulator. "^usbldo[1-2]$": type: object $ref: regulator.yaml# unevaluatedProperties: false description: Properties for a single USBLDO regulator. additionalProperties: false