# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/regulator/maxim,max77686.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim MAX77686 Power Management IC regulators maintainers: - Chanwoo Choi - Krzysztof Kozlowski description: | This is a part of device tree bindings for Maxim MAX77686 Power Management Integrated Circuit (PMIC). The Maxim MAX77686 provides high-efficiency Buck and 26 Low-DropOut (LDO) regulators. See also Documentation/devicetree/bindings/mfd/maxim,max77686.yaml for additional information and example. patternProperties: # 26 LDOs "^LDO([1-9]|1[0-9]|2[3-6])$": type: object $ref: regulator.yaml# unevaluatedProperties: false description: | Properties for single LDO regulator. Regulators which can be turned off during system suspend: LDO2, LDO6-8, LDO10-12, LDO14-16 required: - regulator-name # LDO20-LDO22 with maxim,ena-gpios "^LDO2[0-2]$": type: object $ref: regulator.yaml# unevaluatedProperties: false description: | Properties for single LDO regulator. properties: maxim,ena-gpios: maxItems: 1 description: | GPIO specifier to enable the GPIO control (on/off) for regulator. required: - regulator-name # 9 bucks "^BUCK[1-7]$": type: object $ref: regulator.yaml# unevaluatedProperties: false description: | Properties for single BUCK regulator. Regulators which can be turned off during system suspend: BUCK[1-4] required: - regulator-name "^BUCK[89]$": type: object $ref: regulator.yaml# unevaluatedProperties: false description: | Properties for single BUCK regulator. properties: maxim,ena-gpios: maxItems: 1 description: | GPIO specifier to enable the GPIO control (on/off) for regulator. required: - regulator-name additionalProperties: false