Intersil ISL9305/ISL9305H voltage regulator Required properties: - compatible: "isil,isl9305" or "isil,isl9305h" - reg: I2C slave address, usually 0x68. - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name, with valid values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. - VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. Optional properties: - Per-regulator optional properties are defined in regulator.txt Example pmic: isl9305@68 { compatible = "isil,isl9305"; reg = <0x68>; VINDCD1-supply = <&system_power>; VINDCD2-supply = <&system_power>; VINLDO1-supply = <&system_power>; VINLDO2-supply = <&system_power>; regulators { dcd1 { regulator-name = "VDD_DSP"; regulator-always-on; }; }; };