# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 PWM maintainers: - Chen-Yu Tsai - Maxime Ripard properties: "#pwm-cells": const: 3 compatible: oneOf: - const: allwinner,sun4i-a10-pwm - const: allwinner,sun5i-a10s-pwm - const: allwinner,sun5i-a13-pwm - const: allwinner,sun7i-a20-pwm - const: allwinner,sun8i-h3-pwm - items: - const: allwinner,sun8i-a83t-pwm - const: allwinner,sun8i-h3-pwm - items: - enum: - allwinner,suniv-f1c100s-pwm - allwinner,sun8i-v3s-pwm - const: allwinner,sun7i-a20-pwm - items: - const: allwinner,sun50i-a64-pwm - const: allwinner,sun5i-a13-pwm - items: - const: allwinner,sun50i-h5-pwm - const: allwinner,sun5i-a13-pwm - const: allwinner,sun50i-h6-pwm reg: maxItems: 1 clocks: minItems: 1 items: - description: Module Clock - description: Bus Clock # Even though it only applies to subschemas under the conditionals, # not listing them here will trigger a warning because of the # additionalsProperties set to false. clock-names: true resets: maxItems: 1 allOf: - $ref: pwm.yaml# - if: properties: compatible: contains: const: allwinner,sun50i-h6-pwm then: properties: clocks: maxItems: 2 clock-names: items: - const: mod - const: bus required: - clock-names - resets else: properties: clocks: maxItems: 1 required: - compatible - reg - clocks additionalProperties: false examples: - | pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; #pwm-cells = <3>; }; - | #include #include pwm@300a000 { compatible = "allwinner,sun50i-h6-pwm"; reg = <0x0300a000 0x400>; clocks = <&osc24M>, <&ccu CLK_BUS_PWM>; clock-names = "mod", "bus"; resets = <&ccu RST_BUS_PWM>; #pwm-cells = <3>; }; ...