* Freescale MPIC timers Required properties: - compatible: "fsl,mpic-global-timer" - reg : Contains two regions. The first is the main timer register bank (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx). The second is the timer control register (TCRx) for the group. - fsl,available-ranges: use style section to define which timer interrupts can be used. This property is optional; without this, all timers within the group can be used. - interrupts: one interrupt per timer in the group, in order, starting with timer zero. If timer-available-ranges is present, only the interrupts that correspond to available timers shall be present. Example: /* Note that this requires #interrupt-cells to be 4 */ timer0: timer@41100 { compatible = "fsl,mpic-global-timer"; reg = <0x41100 0x100 0x41300 4>; /* Another AMP partition is using timers 0 and 1 */ fsl,available-ranges = <2 2>; interrupts = <2 0 3 0 3 0 3 0>; }; timer1: timer@42100 { compatible = "fsl,mpic-global-timer"; reg = <0x42100 0x100 0x42300 4>; interrupts = <4 0 3 0 5 0 3 0 6 0 3 0 7 0 3 0>; };