# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/richtek,rt9756.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Richtek RT9756 Smart Cap Divider Charger

maintainers:
  - ChiYuan Huang <cy_huang@richtek.com>

description: |
  The RT9756/RT9757 is a high efficiency and high charge current charger.

  The efficiency is up to 98.2% when VBAT = 4V, IBAT = 2A in DIV2 mode and 99.1%
  when VBAT=4V, IBAT=1A in bypass mode. The maximum charger current is up to 8A
  in DIV2 mode and 5A in bypass mode. The device integrates smart cap divider
  topology, direct charging mode, external over-voltage protection control, an
  input reverse blocking NFET and 2-way regulation, a dual phase charge pump
  core, 8-Channel high speed ADCs and USB BC 1.2 detection.

  RT9770 is almost the same with RT9756/57, only BC 1.2 detection function is
  removed to shrink the die size.

allOf:
  - $ref: power-supply.yaml#

properties:
  compatible:
    oneOf:
      - enum:
          - richtek,rt9756
          - richtek,rt9770
      - items:
          - enum:
              - richtek,rt9757
          - const: richtek,rt9756

  reg:
    maxItems: 1

  wakeup-source: true

  interrupts:
    maxItems: 1

  shunt-resistor-micro-ohms:
    description: Battery current sense resistor mounted.
    default: 2000

required:
  - compatible
  - reg
  - interrupts

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;

      charger@6f {
        compatible = "richtek,rt9756";
        reg = <0x6f>;
        wakeup-source;
        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>;
        shunt-resistor-micro-ohms = <5000>;
      };
    };