# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller maintainers: - Claudiu Beznea description: | Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO and VDDCORE and the wake-up detection on debounced input lines. properties: compatible: oneOf: - items: - const: microchip,sama7g5-shdwc - const: syscon - enum: - atmel,sama5d2-shdwc - microchip,sam9x60-shdwc reg: maxItems: 1 clocks: maxItems: 1 "#address-cells": const: 1 "#size-cells": const: 0 debounce-delay-us: description: Minimum wake-up inputs debouncer period in microseconds. It is usually a board-related property. atmel,wakeup-rtc-timer: description: enable real-time clock wake-up type: boolean atmel,wakeup-rtt-timer: description: enable real-time timer wake-up type: boolean patternProperties: "^input@[0-15]$": description: Wake-up input nodes. These are usually described in the "board" part of the Device Tree. Note also that input 0 is linked to the wake-up pin and is frequently used. type: object properties: reg: description: contains the wake-up input index minimum: 0 maximum: 15 atmel,wakeup-active-high: description: The corresponding wake-up input described by the child forces the wake-up of the core power supply on a high level. The default is to be active low. type: boolean required: - reg additionalProperties: false required: - compatible - reg - clocks allOf: - if: properties: compatible: contains: const: atmel,sama5d2-shdwc then: properties: atmel,wakeup-rtt-timer: false additionalProperties: false examples: - | shdwc: poweroff@f8048010 { compatible = "atmel,sama5d2-shdwc"; reg = <0xf8048010 0x10>; clocks = <&clk32k>; #address-cells = <1>; #size-cells = <0>; atmel,wakeup-rtc-timer; debounce-delay-us = <976>; input@0 { reg = <0>; }; input@1 { reg = <1>; atmel,wakeup-active-high; }; }; ...