# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM6115 SoC LPASS LPI TLMM maintainers: - Konrad Dybcio - Srinivas Kandagatla description: Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC. properties: compatible: const: qcom,sm6115-lpass-lpi-pinctrl reg: items: - description: LPASS LPI TLMM Control and Status registers - description: LPASS LPI MCC registers clocks: items: - description: LPASS Audio voting clock clock-names: items: - const: audio patternProperties: "-state$": oneOf: - $ref: "#/$defs/qcom-sm6115-lpass-state" - patternProperties: "-pins$": $ref: "#/$defs/qcom-sm6115-lpass-state" additionalProperties: false $defs: qcom-sm6115-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state unevaluatedProperties: false properties: pins: description: List of gpio pins affected by the properties specified in this subnode. items: pattern: "^gpio([0-9]|1[0-8])$" function: enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ] description: Specify the alternative function to be configured for the specified pins. allOf: - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names unevaluatedProperties: false examples: - | #include lpass_tlmm: pinctrl@a7c0000 { compatible = "qcom,sm6115-lpass-lpi-pinctrl"; reg = <0x0a7c0000 0x20000>, <0x0a950000 0x10000>; clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "audio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 19>; };