# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cadence Sierra PHY

description:
  This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
  multiprotocol combinations including protocols such as PCIe, USB etc.

maintainers:
  - Swapnil Jakhade <sjakhade@cadence.com>
  - Yuti Amonkar <yamonkar@cadence.com>

properties:
  compatible:
    enum:
      - cdns,sierra-phy-t0
      - ti,sierra-phy-t0

  '#address-cells':
    const: 1

  '#size-cells':
    const: 0

  '#clock-cells':
    const: 1

  resets:
    minItems: 1
    items:
      - description: Sierra PHY reset.
      - description: Sierra APB reset. This is optional.

  reset-names:
    minItems: 1
    items:
      - const: sierra_reset
      - const: sierra_apb

  reg:
    maxItems: 1
    description:
      Offset of the Sierra PHY configuration registers.

  reg-names:
    const: serdes

  clocks:
    minItems: 2
    maxItems: 4

  clock-names:
    minItems: 2
    items:
      - const: cmn_refclk_dig_div
      - const: cmn_refclk1_dig_div
      - const: pll0_refclk
      - const: pll1_refclk

  cdns,autoconf:
    type: boolean
    description:
      A boolean property whose presence indicates that the PHY registers will be
      configured by hardware. If not present, all sub-node optional properties
      must be provided.

patternProperties:
  '^phy@[0-9a-f]$':
    type: object
    description:
      Each group of PHY lanes with a single master lane should be represented as
      a sub-node. Note that the actual configuration of each lane is determined
      by hardware strapping, and must match the configuration specified here.
    properties:
      reg:
        description:
          The master lane number. This is the lowest numbered lane in the lane group.
        minimum: 0
        maximum: 15

      resets:
        minItems: 1
        maxItems: 4
        description:
          Contains list of resets, one per lane, to get all the link lanes out of reset.

      "#phy-cells":
        const: 0

      cdns,phy-type:
        description:
          Specifies the type of PHY for which the group of PHY lanes is used.
          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [2, 4]

      cdns,num-lanes:
        description:
          Number of lanes in this group. The group is made up of consecutive lanes.
        $ref: /schemas/types.yaml#/definitions/uint32
        minimum: 1
        maximum: 16

      cdns,ssc-mode:
        description:
          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
          EXTERNAL_SSC or INTERNAL_SSC.
          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
        $ref: /schemas/types.yaml#/definitions/uint32
        enum: [0, 1, 2]
        default: 1

    required:
      - reg
      - resets
      - "#phy-cells"

    additionalProperties: false

required:
  - compatible
  - "#address-cells"
  - "#size-cells"
  - reg
  - resets
  - reset-names

additionalProperties: false

examples:
  - |
    #include <dt-bindings/phy/phy.h>

    bus {
        #address-cells = <2>;
        #size-cells = <2>;

        sierra-phy@fd240000 {
            compatible = "cdns,sierra-phy-t0";
            reg = <0x0 0xfd240000 0x0 0x40000>;
            resets = <&phyrst 0>, <&phyrst 1>;
            reset-names = "sierra_reset", "sierra_apb";
            clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>;
            clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
            #address-cells = <1>;
            #size-cells = <0>;
            pcie0_phy0: phy@0 {
                reg = <0>;
                resets = <&phyrst 2>;
                cdns,num-lanes = <2>;
                #phy-cells = <0>;
                cdns,phy-type = <PHY_TYPE_PCIE>;
            };
            pcie0_phy1: phy@2 {
                reg = <2>;
                resets = <&phyrst 4>;
                cdns,num-lanes = <1>;
                #phy-cells = <0>;
                cdns,phy-type = <PHY_TYPE_PCIE>;
            };
        };
    };