# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ %YAML 1.2 --- $id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI AM65 PCI Host maintainers: - Kishon Vijay Abraham I allOf: - $ref: /schemas/pci/pci-bus.yaml# properties: compatible: enum: - ti,am654-pcie-rc - ti,keystone-pcie reg: maxItems: 4 reg-names: items: - const: app - const: dbics - const: config - const: atu interrupts: maxItems: 1 power-domains: maxItems: 1 ti,syscon-pcie-id: $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: Phandle to the SYSCON entry - description: pcie_device_id register offset within SYSCON description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID ti,syscon-pcie-mode: $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: Phandle to the SYSCON entry - description: pcie_ctrl register offset within SYSCON description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode. msi-map: true dma-coherent: true required: - compatible - reg - reg-names - max-link-speed - ti,syscon-pcie-id - ti,syscon-pcie-mode - ranges if: properties: compatible: enum: - ti,am654-pcie-rc then: required: - dma-coherent - power-domains - msi-map unevaluatedProperties: false examples: - | #include #include #include pcie0_rc: pcie@5500000 { compatible = "ti,am654-pcie-rc"; reg = <0x5500000 0x1000>, <0x5501000 0x1000>, <0x10000000 0x2000>, <0x5506000 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; ranges = <0x81000000 0 0 0x10020000 0 0x00010000>, <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>; ti,syscon-pcie-id = <&scm_conf 0x0210>; ti,syscon-pcie-mode = <&scm_conf 0x4060>; bus-range = <0x0 0xff>; max-link-speed = <2>; dma-coherent; interrupts = ; msi-map = <0x0 &gic_its 0x0 0x10000>; device_type = "pci"; };