# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTGMAC100 gigabit ethernet controller allOf: - $ref: ethernet-controller.yaml# maintainers: - Po-Yu Chuang properties: compatible: oneOf: - const: faraday,ftgmac100 - items: - enum: - aspeed,ast2400-mac - aspeed,ast2500-mac - aspeed,ast2600-mac - const: faraday,ftgmac100 reg: maxItems: 1 interrupts: maxItems: 1 clocks: minItems: 1 items: - description: MAC IP clock - description: RMII RCLK gate for AST2500/2600 clock-names: minItems: 1 items: - const: MACCLK - const: RCLK phy-mode: enum: - rgmii - rmii phy-handle: true use-ncsi: description: Use the NC-SI stack instead of an MDIO PHY. Currently assumes rmii (100bT) but kept as a separate property in case NC-SI grows support for a gigabit link. type: boolean no-hw-checksum: description: Used to disable HW checksum support. Here for backward compatibility as the driver now should have correct defaults based on the SoC. type: boolean deprecated: true mdio: $ref: /schemas/net/mdio.yaml# required: - compatible - reg - interrupts unevaluatedProperties: false examples: - | ethernet@1e660000 { compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; use-ncsi; }; ethernet@1e680000 { compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; interrupts = <2>; phy-handle = <&phy>; phy-mode = "rgmii"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; };