# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic DSA Switch Port maintainers: - Andrew Lunn - Florian Fainelli - Vladimir Oltean description: A DSA switch port is a component of a switch that manages one MAC, and can pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have DSA-specific functionality. $ref: /schemas/net/ethernet-switch-port.yaml# properties: reg: items: - description: Port number label: description: Describes the label associated with this port, which will become the netdev name $ref: /schemas/types.yaml#/definitions/string link: description: Should be a list of phandles to other switch's DSA port. This port is used as the outgoing port towards the phandle ports. The full routing information must be given, not just the one hop routes to neighbouring switches $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 ethernet: description: Should be a phandle to a valid Ethernet device node. This host device is what the switch port is connected to $ref: /schemas/types.yaml#/definitions/phandle dsa-tag-protocol: description: Instead of the default, the switch will use this tag protocol if possible. Useful when a device supports multiple protocols and the default is incompatible with the Ethernet device. enum: - dsa - edsa - ocelot - ocelot-8021q - rtl8_4 - rtl8_4t - seville # CPU and DSA ports must have phylink-compatible link descriptions if: oneOf: - required: [ ethernet ] - required: [ link ] then: allOf: - required: - phy-mode - oneOf: - required: - fixed-link - required: - phy-handle - required: - managed additionalProperties: true ...