# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/partitions/simple-partition.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Simple partition types

description:
  Simple partition types which only define a "compatible" value and no custom
  properties.

maintainers:
  - Rafał Miłecki <rafal@milecki.pl>
  - Simon Glass <sjg@chromium.org>

allOf:
  - $ref: partition.yaml#

properties:
  compatible:
    oneOf:
      - const: brcm,bcm4908-firmware
        description:
          Broadcom BCM4908 CFE bootloader firmware partition

      - const: brcm,bcm963xx-imagetag
        description:
          The BCM963XX ImageTag is a simple firmware header describing the
          offsets and sizes of the rootfs and kernel parts contained in the
          firmware.

      - const: seama
        description:
          The SEAttle iMAge (SEAMA) partition is a type of partition used for
          NAND flash devices. This type of flash image is found in some D-Link
          routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L
          and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS),
          Broadcom BCM53xx, and RAMIPS platforms. This partition type does not
          have children defined in the device tree, they need to be detected by
          software.

      - const: u-boot
        description: >
          u-boot.bin from U-Boot project.

          This corresponds to a binman 'entry'. It is a single partition which holds
          data of a defined type.

          Binman uses the type to indicate what data file / type to place in the
          partition. There are quite a number of binman-specific entry types, such as
          section, fill and files, to be added later.

      - const: tfa-bl31
        description: >
          bl31.bin or bl31.elf from TF-A project

          This corresponds to a binman 'entry'. It is a single partition which holds
          data of a defined type.

unevaluatedProperties: false