Broadcom BCM47xx Partitions
===========================

Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
home routers. Their BCM947xx boards using CFE bootloader have several partitions
without any on-flash partition table. On some devices their sizes and/or
meanings can also vary so fixed partitioning can't be used.

Discovering partitions on these devices is possible thanks to having a special
header and/or magic signature at the beginning of each of them. They are also
block aligned which is important for determinig a size.

Most of partitions use ASCII text based magic for determining a type. More
complex partitions (like TRX with its HDR0 magic) may include extra header
containing some details, including a length.

A list of supported partitions includes:
1) Bootloader with Broadcom's CFE (Common Firmware Environment)
2) NVRAM with configuration/calibration data
3) Device manufacturer's data with some default values (e.g. SSIDs)
4) TRX firmware container which can hold up to 4 subpartitions
5) Backup TRX firmware used after failed upgrade

As mentioned earlier, role of some partitions may depend on extra configuration.
For example both: main firmware and backup firmware use the same TRX format with
the same header. To distinguish currently used firmware a CFE's environment
variable "bootpartition" is used.


Devices using Broadcom partitions described above should should have flash node
with a subnode named "partitions" using following properties:

Required properties:
- compatible : (required) must be "brcm,bcm947xx-cfe-partitions"

Example:

flash@0 {
	partitions {
		compatible = "brcm,bcm947xx-cfe-partitions";
	};
};