# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rohm,bd96802-pmic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ROHM BD96802 / BD96806 Scalable Power Management Integrated Circuit

maintainers:
  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

description: |
  BD96802Qxx-C and BD96806 are automotive grade configurable Power Management
  Integrated Circuits supporting Functional Safety features for application
  processors, SoCs and FPGAs

properties:
  compatible:
    enum:
      - rohm,bd96802
      - rohm,bd96806

  reg:
    maxItems: 1

  interrupts:
    description:
      The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
      for fatal IRQs which will cause the PMIC to shut down power outputs.
      In many systems this will shut down the SoC contolling the PMIC and
      connecting/handling the errb can be omitted. However, there are cases
      where the SoC is not powered by the PMIC or has a short time backup
      energy to handle shutdown of critical hardware. In that case it may be
      useful to connect the errb and handle errb events.
    minItems: 1
    maxItems: 2

  interrupt-names:
    minItems: 1
    items:
      - enum: [intb, errb]
      - const: errb

  regulators:
    $ref: ../regulator/rohm,bd96802-regulator.yaml
    description:
      List of child nodes that specify the regulators.

required:
  - compatible
  - reg
  - interrupts
  - interrupt-names
  - regulators

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/leds/common.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
        pmic: pmic@62 {
            reg = <0x62>;
            compatible = "rohm,bd96802";
            interrupt-parent = <&gpio1>;
            interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
            interrupt-names = "intb", "errb";

            regulators {
                buck1 {
                    regulator-name = "buck1";
                    regulator-ramp-delay = <1250>;
                    /* 0.5V min INITIAL - 150 mV tune */
                    regulator-min-microvolt = <350000>;
                    /* 3.3V + 150mV tune */
                    regulator-max-microvolt = <3450000>;

                    /* These can be set only when PMIC is in STBY */
                    rohm,initial-voltage-microvolt = <500000>;
                    regulator-ov-error-microvolt = <230000>;
                    regulator-uv-error-microvolt = <230000>;
                    regulator-temp-protection-kelvin = <1>;
                    regulator-temp-warn-kelvin = <0>;
                };
                buck2 {
                    regulator-name = "buck2";
                    regulator-min-microvolt = <350000>;
                    regulator-max-microvolt = <3450000>;

                    rohm,initial-voltage-microvolt = <3000000>;
                    regulator-ov-error-microvolt = <18000>;
                    regulator-uv-error-microvolt = <18000>;
                    regulator-temp-protection-kelvin = <1>;
                    regulator-temp-warn-kelvin = <1>;
                };
            };
        };
    };