# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Common properties for LPDDR types description: Different LPDDR types generally use the same properties and only differ in the range of legal values for each. This file defines the common parts that can be reused for each type. Nodes using this schema should generally be nested under an LPDDR channel node. maintainers: - Krzysztof Kozlowski properties: compatible: description: Compatible strings can be either explicit vendor names and part numbers (e.g. elpida,ECB240ABACN), or generated strings of the form lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are formatted in lower case hexadecimal representation with leading zeroes. The latter form can be useful when LPDDR nodes are created at runtime by boot firmware that doesn't have access to static part number information. reg: description: The rank number of this LPDDR rank when used as a subnode to an LPDDR channel. minimum: 0 maximum: 3 revision-id: $ref: /schemas/types.yaml#/definitions/uint32-array description: Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. ). maxItems: 2 items: minimum: 0 maximum: 255 density: $ref: /schemas/types.yaml#/definitions/uint32 description: Density in megabits of SDRAM chip. Decoded from Mode Register 8. enum: - 64 - 128 - 256 - 512 - 1024 - 2048 - 3072 - 4096 - 6144 - 8192 - 12288 - 16384 - 24576 - 32768 io-width: $ref: /schemas/types.yaml#/definitions/uint32 description: IO bus width in bits of SDRAM chip. Decoded from Mode Register 8. enum: - 8 - 16 - 32 additionalProperties: true