STMicroelectronics stih4xx platforms bdisp: 2D blitter for STMicroelectronics SoC. Required properties: - compatible: should be "st,stih407-bdisp". - reg: BDISP physical address location and length. - interrupts: BDISP interrupt number. - clocks: from common clock binding: handle hardware IP needed clocks, the number of clocks may depend on the SoC type. See ../clocks/clock-bindings.txt for details. - clock-names: names of the clocks listed in clocks property in the same order. Example: bdisp0:bdisp@9f10000 { compatible = "st,stih407-bdisp"; reg = <0x9f10000 0x1000>; interrupts = ; clock-names = "bdisp"; clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; }; Aliases: Each BDISP should have a numbered alias in the aliases node, in the form of bdispN, N = 0 or 1. Example: aliases { bdisp0 = &bdisp0; };