# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Techwell TW9900 NTSC/PAL video decoder maintainers: - Mehdi Djait description: The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards with auto-detection features. properties: compatible: const: techwell,tw9900 reg: maxItems: 1 vdd-supply: description: VDD power supply reset-gpios: description: GPIO descriptor for the RESET input pin maxItems: 1 powerdown-gpios: description: GPIO descriptor for the POWERDOWN input pin maxItems: 1 ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: Analog input port properties: endpoint@0: $ref: /schemas/graph.yaml#/properties/endpoint description: CVBS over MUX0 endpoint@1: $ref: /schemas/graph.yaml#/properties/endpoint description: CVBS over MUX1 endpoint@2: $ref: /schemas/graph.yaml#/properties/endpoint description: Chroma over CIN0 and Y over MUX0 endpoint@3: $ref: /schemas/graph.yaml#/properties/endpoint description: Chroma over CIN0 and Y over MUX1 oneOf: - required: - endpoint@0 - required: - endpoint@1 - required: - endpoint@2 - required: - endpoint@3 port@1: $ref: /schemas/graph.yaml#/properties/port description: Video port for the decoder output. required: - port@0 - port@1 required: - compatible - ports - reg - vdd-supply additionalProperties: false examples: - | #include #include composite_connector { compatible = "composite-video-connector"; label = "tv"; sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>; port { composite_to_tw9900: endpoint { remote-endpoint = <&tw9900_to_composite>; }; }; }; i2c { #address-cells = <1>; #size-cells = <0>; video-decoder@44 { compatible = "techwell,tw9900"; reg = <0x44>; vdd-supply = <&tw9900_supply>; reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; tw9900_to_composite: endpoint@0 { reg = <0>; remote-endpoint = <&composite_to_tw9900>; }; }; port@1 { reg = <1>; endpoint { remote-endpoint = <&cif_in>; }; }; }; }; };