# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5K6A3(YX) raw image sensor maintainers: - Krzysztof Kozlowski description: S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces and CCI (I2C compatible) control bus. properties: compatible: const: samsung,s5k6a3 reg: maxItems: 1 clocks: maxItems: 1 clock-names: items: - const: extclk clock-frequency: default: 24000000 description: extclk clock frequency gpios: maxItems: 1 description: GPIO connected to the RESET pin afvdd-supply: description: AF (actuator) voltage supply svdda-supply: description: Core voltage supply svddio-supply: description: I/O voltage supply port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: data-lanes: items: - const: 1 required: - compatible - clocks - clock-names - gpios - afvdd-supply - svdda-supply - svddio-supply additionalProperties: false examples: - | #include i2c { #address-cells = <1>; #size-cells = <0>; sensor@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; clock-frequency = <24000000>; clocks = <&camera 1>; clock-names = "extclk"; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; afvdd-supply = <&ldo19_reg>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; port { endpoint { remote-endpoint = <&csis1_ep>; data-lanes = <1>; }; }; }; };