# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Omnivision OV4689 CMOS maintainers: - Mikhail Rudenko description: | The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel image sensor. Ihis chip supports high frame rate speeds up to 90 fps at 2688x1520 resolution. It is programmable through an I2C interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2 connection. allOf: - $ref: /schemas/media/video-interface-devices.yaml# properties: compatible: const: ovti,ov4689 reg: maxItems: 1 clocks: description: External clock (XVCLK) for the sensor, 6-64 MHz maxItems: 1 dovdd-supply: description: Digital I/O voltage supply, 1.7-3.0 V avdd-supply: description: Analog voltage supply, 2.6-3.0 V dvdd-supply: description: Digital core voltage supply, 1.1-1.3 V powerdown-gpios: description: GPIO connected to the powerdown pin (active low) reset-gpios: maxItems: 1 description: GPIO connected to the reset pin (active low) port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false description: Output port node, single endpoint describing the CSI-2 transmitter properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: data-lanes: oneOf: - items: - const: 1 - const: 2 - const: 3 - const: 4 - items: - const: 1 - const: 2 - items: - const: 1 link-frequencies: true required: - data-lanes - link-frequencies required: - compatible - reg - clocks - dovdd-supply - avdd-supply - dvdd-supply - port unevaluatedProperties: false examples: - | #include i2c { #address-cells = <1>; #size-cells = <0>; ov4689: camera@36 { compatible = "ovti,ov4689"; reg = <0x36>; clocks = <&ov4689_clk>; avdd-supply = <&ov4689_avdd>; dovdd-supply = <&ov4689_dovdd>; dvdd-supply = <&ov4689_dvdd>; powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>; reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>; orientation = <2>; rotation = <0>; port { wcam_out: endpoint { remote-endpoint = <&mipi_in_wcam>; data-lanes = <1 2 3 4>; link-frequencies = /bits/ 64 <504000000>; }; }; }; }; ...