Binding for dual-GPIO LED found on Network Space v2 (and parents). Required properties: - compatible: "lacie,ns2-leds". Each LED is represented as a sub-node of the ns2-leds device. Required sub-node properties: - cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. - slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. - modes-map: A mapping between LED modes (off, on or SATA activity blinking) and the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations should be given in order to avoid having an unknown mode at driver probe time. Optional sub-node properties: - label: Name for this LED. If omitted, the label is taken from the node name. - linux,default-trigger: Trigger assigned to the LED. Example: #include ns2-leds { compatible = "lacie,ns2-leds"; blue-sata { label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; modes-map = ; }; };