# SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- $id: http://devicetree.org/schemas/iommu/arm,smmu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM System MMU Architecture Implementation maintainers: - Will Deacon - Robin Murphy description: |+ ARM SoCs may contain an implementation of the ARM System Memory Management Unit Architecture, which can be used to provide 1 or 2 stages of address translation to bus masters external to the CPU. The SMMU may also raise interrupts in response to various fault conditions. properties: $nodename: pattern: "^iommu@[0-9a-f]*" compatible: oneOf: - description: Qcom SoCs implementing "arm,smmu-v2" items: - enum: - qcom,msm8996-smmu-v2 - qcom,msm8998-smmu-v2 - qcom,sdm630-smmu-v2 - qcom,sm6375-smmu-v2 - const: qcom,smmu-v2 - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: - qcom,qcm2290-smmu-500 - qcom,qdu1000-smmu-500 - qcom,sa8775p-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8180x-smmu-500 - qcom,sc8280xp-smmu-500 - qcom,sdm670-smmu-500 - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 - qcom,sdx65-smmu-500 - qcom,sdx75-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 - qcom,sm8350-smmu-500 - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 - qcom,x1e80100-smmu-500 - const: qcom,smmu-500 - const: arm,mmu-500 - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding) deprecated: true items: # Do not add additional SoC to this list. Instead use two previous lists. - enum: - qcom,qcm2290-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8180x-smmu-500 - qcom,sc8280xp-smmu-500 - qcom,sdm845-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 - qcom,sm8350-smmu-500 - qcom,sm8450-smmu-500 - const: arm,mmu-500 - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: - qcom,qcm2290-smmu-500 - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8280xp-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 - qcom,sm8350-smmu-500 - qcom,sm8450-smmu-500 - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding) deprecated: true items: # Do not add additional SoC to this list. Instead use previous list. - enum: - qcom,sc7280-smmu-500 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 - const: qcom,adreno-smmu - const: arm,mmu-500 - description: Qcom Adreno GPUs implementing "arm,smmu-v2" items: - enum: - qcom,msm8996-smmu-v2 - qcom,sc7180-smmu-v2 - qcom,sdm630-smmu-v2 - qcom,sdm845-smmu-v2 - qcom,sm6350-smmu-v2 - qcom,sm7150-smmu-v2 - const: qcom,adreno-smmu - const: qcom,smmu-v2 - description: Qcom Adreno GPUs on Google Cheza platform items: - const: qcom,sdm845-smmu-v2 - const: qcom,smmu-v2 - description: Marvell SoCs implementing "arm,mmu-500" items: - const: marvell,ap806-smmu-500 - const: arm,mmu-500 - description: NVIDIA SoCs that require memory controller interaction and may program multiple ARM MMU-500s identically with the memory controller interleaving translations between multiple instances for improved performance. items: - enum: - nvidia,tegra186-smmu - nvidia,tegra194-smmu - nvidia,tegra234-smmu - const: nvidia,smmu-500 - items: - const: arm,mmu-500 - const: arm,smmu-v2 - items: - enum: - arm,mmu-400 - arm,mmu-401 - const: arm,smmu-v1 - enum: - arm,smmu-v1 - arm,smmu-v2 - arm,mmu-400 - arm,mmu-401 - arm,mmu-500 - cavium,smmu-v2 reg: minItems: 1 maxItems: 2 '#global-interrupts': description: The number of global interrupts exposed by the device. $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters '#iommu-cells': enum: [ 1, 2 ] description: | See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a value of 1, each IOMMU specifier represents a distinct stream ID emitted by that device into the relevant SMMU. SMMUs with stream matching support and complex masters may use a value of 2, where the second cell of the IOMMU specifier represents an SMR mask to combine with the ID in the first cell. Care must be taken to ensure the set of matched IDs does not result in conflicts. interrupts: minItems: 1 maxItems: 388 # 260 plus 128 contexts description: | Interrupt list, with the first #global-interrupts entries corresponding to the global interrupts and any following entries corresponding to context interrupts, specified in order of their indexing by the SMMU. For SMMUv2 implementations, there must be exactly one interrupt per context bank. In the case of a single, combined interrupt, it must be listed multiple times. dma-coherent: description: | Present if page table walks made by the SMMU are cache coherent with the CPU. NOTE: this only applies to the SMMU itself, not masters connected upstream of the SMMU. calxeda,smmu-secure-config-access: type: boolean description: Enable proper handling of buggy implementations that always use secure access to SMMU configuration registers. In this case non-secure aliases of secure registers have to be used during SMMU configuration. stream-match-mask: $ref: /schemas/types.yaml#/definitions/uint32 description: | For SMMUs supporting stream matching and using #iommu-cells = <1>, specifies a mask of bits to ignore when matching stream IDs (e.g. this may be programmed into the SMRn.MASK field of every stream match register used). For cases where it is desirable to ignore some portion of every Stream ID (e.g. for certain MMU-500 configurations given globally unique input IDs). This property is not valid for SMMUs using stream indexing, or using stream matching with #iommu-cells = <2>, and may be ignored if present in such cases. clock-names: minItems: 1 maxItems: 7 clocks: minItems: 1 maxItems: 7 power-domains: minItems: 1 maxItems: 3 nvidia,memory-controller: description: | A phandle to the memory controller on NVIDIA Tegra186 and later SoCs. The memory controller needs to be programmed with a mapping of memory client IDs to ARM SMMU stream IDs. If this property is absent, the mapping programmed by early firmware will be used and it is not guaranteed that IOMMU translations will be enabled for any given device. $ref: /schemas/types.yaml#/definitions/phandle required: - compatible - reg - '#global-interrupts' - '#iommu-cells' - interrupts additionalProperties: false allOf: - if: properties: compatible: contains: enum: - nvidia,tegra186-smmu - nvidia,tegra194-smmu - nvidia,tegra234-smmu then: properties: reg: minItems: 1 maxItems: 2 # The reference to the memory controller is required to ensure that the # memory client to stream ID mapping can be done synchronously with the # IOMMU attachment. required: - nvidia,memory-controller else: properties: reg: maxItems: 1 - if: properties: compatible: contains: enum: - qcom,msm8998-smmu-v2 - qcom,sdm630-smmu-v2 then: anyOf: - properties: clock-names: items: - const: bus clocks: items: - description: bus clock required for downstream bus access and for the smmu ptw - properties: clock-names: items: - const: iface - const: mem - const: mem_iface clocks: items: - description: interface clock required to access smmu's registers through the TCU's programming interface. - description: bus clock required for memory access - description: bus clock required for GPU memory access - properties: clock-names: items: - const: iface-mm - const: iface-smmu - const: bus-smmu clocks: items: - description: interface clock required to access mnoc's registers through the TCU's programming interface. - description: interface clock required to access smmu's registers through the TCU's programming interface. - description: bus clock required for the smmu ptw - if: properties: compatible: contains: enum: - qcom,sm6375-smmu-v2 then: anyOf: - properties: clock-names: items: - const: bus clocks: items: - description: bus clock required for downstream bus access and for the smmu ptw - properties: clock-names: items: - const: iface - const: mem - const: mem_iface clocks: items: - description: interface clock required to access smmu's registers through the TCU's programming interface. - description: bus clock required for memory access - description: bus clock required for GPU memory access - properties: clock-names: items: - const: iface-mm - const: iface-smmu - const: bus-mm - const: bus-smmu clocks: items: - description: interface clock required to access mnoc's registers through the TCU's programming interface. - description: interface clock required to access smmu's registers through the TCU's programming interface. - description: bus clock required for downstream bus access - description: bus clock required for the smmu ptw - if: properties: compatible: contains: enum: - qcom,msm8996-smmu-v2 - qcom,sc7180-smmu-v2 - qcom,sdm845-smmu-v2 then: properties: clock-names: items: - const: bus - const: iface clocks: items: - description: bus clock required for downstream bus access and for the smmu ptw - description: interface clock required to access smmu's registers through the TCU's programming interface. - if: properties: compatible: contains: enum: - qcom,sa8775p-smmu-500 - qcom,sc7280-smmu-500 - qcom,sc8280xp-smmu-500 then: properties: clock-names: items: - const: gcc_gpu_memnoc_gfx_clk - const: gcc_gpu_snoc_dvm_gfx_clk - const: gpu_cc_ahb_clk - const: gpu_cc_hlos1_vote_gpu_smmu_clk - const: gpu_cc_cx_gmu_clk - const: gpu_cc_hub_cx_int_clk - const: gpu_cc_hub_aon_clk clocks: items: - description: GPU memnoc_gfx clock - description: GPU snoc_dvm_gfx clock - description: GPU ahb clock - description: GPU hlos1_vote_GPU smmu clock - description: GPU cx_gmu clock - description: GPU hub_cx_int clock - description: GPU hub_aon clock - if: properties: compatible: contains: enum: - qcom,sm6350-smmu-v2 - qcom,sm7150-smmu-v2 - qcom,sm8150-smmu-500 - qcom,sm8250-smmu-500 then: properties: clock-names: items: - const: ahb - const: bus - const: iface clocks: items: - description: bus clock required for AHB bus access - description: bus clock required for downstream bus access and for the smmu ptw - description: interface clock required to access smmu's registers through the TCU's programming interface. - if: properties: compatible: items: - enum: - qcom,sm8350-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 then: properties: clock-names: items: - const: bus - const: iface - const: ahb - const: hlos1_vote_gpu_smmu - const: cx_gmu - const: hub_cx_int - const: hub_aon clocks: minItems: 7 maxItems: 7 - if: properties: compatible: items: - enum: - qcom,qcm2290-smmu-500 - qcom,sm6115-smmu-500 - qcom,sm6125-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 then: properties: clock-names: items: - const: mem - const: hlos - const: iface clocks: items: - description: GPU memory bus clock - description: Voter clock required for HLOS SMMU access - description: Interface clock required for register access - if: properties: compatible: items: - const: qcom,sm8450-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 then: properties: clock-names: items: - const: gmu - const: hub - const: hlos - const: bus - const: iface - const: ahb clocks: items: - description: GMU clock - description: GPU HUB clock - description: HLOS vote clock - description: GPU memory bus clock - description: GPU SNoC bus clock - description: GPU AHB clock - if: properties: compatible: items: - enum: - qcom,sm8550-smmu-500 - qcom,sm8650-smmu-500 - const: qcom,adreno-smmu - const: qcom,smmu-500 - const: arm,mmu-500 then: properties: clock-names: items: - const: hlos - const: bus - const: iface - const: ahb clocks: items: - description: HLOS vote clock - description: GPU memory bus clock - description: GPU SNoC bus clock - description: GPU AHB clock # Disallow clocks for all other platforms with specific compatibles - if: properties: compatible: contains: enum: - cavium,smmu-v2 - marvell,ap806-smmu-500 - nvidia,smmu-500 - qcom,qdu1000-smmu-500 - qcom,sc7180-smmu-500 - qcom,sc8180x-smmu-500 - qcom,sdm670-smmu-500 - qcom,sdm845-smmu-500 - qcom,sdx55-smmu-500 - qcom,sdx65-smmu-500 - qcom,sm6350-smmu-500 - qcom,sm6375-smmu-500 - qcom,x1e80100-smmu-500 then: properties: clock-names: false clocks: false - if: properties: compatible: contains: const: qcom,sm6375-smmu-500 then: properties: power-domains: items: - description: SNoC MMU TBU RT GDSC - description: SNoC MMU TBU NRT GDSC - description: SNoC TURING MMU TBU0 GDSC required: - power-domains else: properties: power-domains: maxItems: 1 examples: - |+ /* SMMU with stream matching or stream indexing */ smmu1: iommu@ba5e0000 { compatible = "arm,smmu-v1"; reg = <0xba5e0000 0x10000>; #global-interrupts = <2>; interrupts = <0 32 4>, <0 33 4>, <0 34 4>, /* This is the first context interrupt */ <0 35 4>, <0 36 4>, <0 37 4>; #iommu-cells = <1>; }; /* device with two stream IDs, 0 and 7 */ master1 { iommus = <&smmu1 0>, <&smmu1 7>; }; /* SMMU with stream matching */ smmu2: iommu@ba5f0000 { compatible = "arm,smmu-v1"; reg = <0xba5f0000 0x10000>; #global-interrupts = <2>; interrupts = <0 38 4>, <0 39 4>, <0 40 4>, /* This is the first context interrupt */ <0 41 4>, <0 42 4>, <0 43 4>; #iommu-cells = <2>; }; /* device with stream IDs 0 and 7 */ master2 { iommus = <&smmu2 0 0>, <&smmu2 7 0>; }; /* device with stream IDs 1, 17, 33 and 49 */ master3 { iommus = <&smmu2 1 0x30>; }; /* ARM MMU-500 with 10-bit stream ID input configuration */ smmu3: iommu@ba600000 { compatible = "arm,mmu-500", "arm,smmu-v2"; reg = <0xba600000 0x10000>; #global-interrupts = <2>; interrupts = <0 44 4>, <0 45 4>, <0 46 4>, /* This is the first context interrupt */ <0 47 4>, <0 48 4>, <0 49 4>; #iommu-cells = <1>; /* always ignore appended 5-bit TBU number */ stream-match-mask = <0x7c00>; }; bus { /* bus whose child devices emit one unique 10-bit stream ID each, but may master through multiple SMMU TBUs */ iommu-map = <0 &smmu3 0 0x400>; }; - |+ /* Qcom's arm,smmu-v2 implementation */ #include #include smmu4: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xd00000 0x10000>; #global-interrupts = <1>; interrupts = , , ; #iommu-cells = <1>; power-domains = <&mmcc 0>; clocks = <&mmcc 123>, <&mmcc 124>; clock-names = "bus", "iface"; };