* Cortina Systems Gemini interrupt controller This interrupt controller is found on the Gemini SoCs. Required properties: - compatible: must be "cortina,gemini-interrupt-controller" - reg: The register bank for the interrupt controller. - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: The number of cells to define the interrupts. Must be 2 as the controller can specify level or rising edge IRQs. The bindings follows the standard binding for controllers with two cells specified in interrupt-controller/interrupts.txt Example: interrupt-controller@48000000 { compatible = "cortina,gemini-interrupt-controller"; reg = <0x48000000 0x1000>; interrupt-controller; #interrupt-cells = <2>; };