# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SDM660 Network-On-Chip interconnect maintainers: - Konrad Dybcio description: | The Qualcomm SDM660 interconnect providers support adjusting the bandwidth requirements between the various NoC fabrics. properties: compatible: enum: - qcom,sdm660-a2noc - qcom,sdm660-bimc - qcom,sdm660-cnoc - qcom,sdm660-gnoc - qcom,sdm660-mnoc - qcom,sdm660-snoc reg: maxItems: 1 clock-names: minItems: 1 maxItems: 5 clocks: minItems: 1 maxItems: 5 required: - compatible - reg unevaluatedProperties: false allOf: - $ref: qcom,rpm-common.yaml# - if: properties: compatible: const: qcom,sdm660-mnoc then: properties: clocks: items: - description: CPU-NoC High-performance Bus Clock. clock-names: const: iface - if: properties: compatible: const: qcom,sdm660-a2noc then: properties: clocks: items: - description: IPA Clock. - description: UFS AXI Clock. - description: Aggregate2 UFS AXI Clock. - description: Aggregate2 USB3 AXI Clock. - description: Config NoC USB2 AXI Clock. clock-names: items: - const: ipa - const: ufs_axi - const: aggre2_ufs_axi - const: aggre2_usb3_axi - const: cfg_noc_usb2_axi examples: - | #include #include #include bimc: interconnect@1008000 { compatible = "qcom,sdm660-bimc"; reg = <0x01008000 0x78000>; #interconnect-cells = <1>; }; a2noc: interconnect@1704000 { compatible = "qcom,sdm660-a2noc"; reg = <0x01704000 0xc100>; #interconnect-cells = <1>; clocks = <&rpmcc RPM_SMD_IPA_CLK>, <&gcc GCC_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_UFS_AXI_CLK>, <&gcc GCC_AGGRE2_USB3_AXI_CLK>, <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; clock-names = "ipa", "ufs_axi", "aggre2_ufs_axi", "aggre2_usb3_axi", "cfg_noc_usb2_axi"; };