# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/interconnect/qcom,nord-rpmh.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm RPMh Network-On-Chip Interconnect on Nord maintainers: - Odelu Kukatla description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is able to communicate with the BCM through the Resource State Coordinator (RSC) associated with each execution environment. Provider nodes must point to at least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. See also: include/dt-bindings/interconnect/qcom,nord-rpmh.h properties: compatible: enum: - qcom,nord-aggre1-noc - qcom,nord-aggre1-noc-tile - qcom,nord-aggre2-noc - qcom,nord-aggre2-noc-tile - qcom,nord-clk-virt - qcom,nord-cnoc-cfg - qcom,nord-cnoc-main - qcom,nord-hpass-ag-noc - qcom,nord-hscnoc - qcom,nord-mc-virt - qcom,nord-mmss-noc - qcom,nord-nsp-data-noc-0 - qcom,nord-nsp-data-noc-1 - qcom,nord-nsp-data-noc-2 - qcom,nord-nsp-data-noc-3 - qcom,nord-pcie-cfg - qcom,nord-pcie-data-inbound - qcom,nord-pcie-data-outbound - qcom,nord-system-noc reg: maxItems: 1 clocks: minItems: 1 maxItems: 4 required: - compatible allOf: - $ref: qcom,rpmh-common.yaml# - if: properties: compatible: contains: enum: - qcom,nord-clk-virt - qcom,nord-mc-virt then: properties: reg: false else: required: - reg - if: properties: compatible: contains: enum: - qcom,nord-aggre1-noc-tile then: properties: clocks: items: - description: aggre UFS PHY AXI clock - description: aggre USB2 AXI clock - description: aggre USB3 PRIM AXI clock - description: aggre USB3 SEC AXI clock - if: properties: compatible: contains: enum: - qcom,nord-aggre2-noc then: properties: clocks: items: - description: RPMH CC IPA clock - if: properties: compatible: contains: enum: - qcom,nord-aggre1-noc-tile - qcom,nord-aggre2-noc then: required: - clocks else: properties: clocks: false unevaluatedProperties: false examples: - | clk_virt: interconnect-clk-virt { compatible = "qcom,nord-clk-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc_tile: interconnect@1720000 { compatible = "qcom,nord-aggre1-noc-tile"; reg = <0x01720000 0x23400>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; clocks = <&ne_gcc_aggre_noc_ufs_phy_axi_clk>, <&ne_gcc_aggre_noc_usb2_axi_clk>, <&ne_gcc_aggre_noc_usb3_prim_axi_clk>, <&ne_gcc_aggre_noc_usb3_sec_axi_clk>; };