# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Ultrascale AMS controller maintainers: - Anand Ashok Dumbre description: | The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors that can be used to sample external voltages and monitor on-die operating conditions, such as temperature and supply voltage levels. The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and PS (Processing System) SYSMON. All designs should have AMS registers, but PS and PL are optional. The AMS controller can work with only PS, only PL and both PS and PL configurations. Please specify registers according to your design. Devicetree should always have AMS module property. Providing PS & PL module is optional. AMS Channel Details ``````````````````` Sysmon Block |Channel| Details |Measurement |Number | |Type --------------------------------------------------------------------------------------------------------- AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage |1 |Battery voltage measurement, VCC_PSBATT. |Voltage |2 |PL Internal voltage measurement, VCCINT. |Voltage |3 |Block RAM voltage measurement, VCCBRAM. |Voltage |4 |PL Aux voltage measurement, VCCAUX. |Voltage |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage --------------------------------------------------------------------------------------------------------- PS Sysmon |7 |LPD temperature measurement. |Temperature |8 |FPD temperature measurement (REMOTE). |Temperature |9 |VCC PS LPD voltage measurement (supply1). |Voltage |10 |VCC PS FPD voltage measurement (supply2). |Voltage |11 |PS Aux voltage reference (supply3). |Voltage |12 |DDR I/O VCC voltage measurement. |Voltage |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage |15 |VCCO_PSIO1 voltage measurement. |Voltage |16 |VCCO_PSIO2 voltage measurement. |Voltage |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage |19 |VCC_PSADC voltage measurement. |Voltage --------------------------------------------------------------------------------------------------------- PL Sysmon |20 |PL temperature measurement. |Temperature |21 |PL Internal voltage measurement, VCCINT. |Voltage |22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage |23 |ADC Reference P+ voltage measurement. |Voltage |24 |ADC Reference N- voltage measurement. |Voltage |25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage |26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage |28 |PS Auxiliary voltage measurement (supply6). |Voltage |29 |PL VCCADC voltage measurement (vccams). |Voltage |30 |Differential analog input signal voltage measurement. |Voltage |31 |VUser0 voltage measurement (supply7). |Voltage |32 |VUser1 voltage measurement (supply8). |Voltage |33 |VUser2 voltage measurement (supply9). |Voltage |34 |VUser3 voltage measurement (supply10). |Voltage |35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage |36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage |37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage |38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage |39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage |40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage |41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage |42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage |43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage |44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage |45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage |46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage |47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage |48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage |49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage |50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage -------------------------------------------------------------------------------------------------------- properties: compatible: enum: - xlnx,zynqmp-ams interrupts: maxItems: 1 reg: description: AMS Controller register space maxItems: 1 clocks: items: - description: AMS reference clock ranges: description: Maps the child address space for PS and/or PL. maxItems: 1 '#address-cells': const: 1 '#size-cells': const: 1 '#io-channel-cells': const: 1 ams-ps@0: type: object description: | PS (Processing System) SYSMON is memory mapped to PS. This block has built-in alarm generation logic that is used to interrupt the processor based on condition set. properties: compatible: enum: - xlnx,zynqmp-ams-ps reg: description: Register Space for PS-SYSMON maxItems: 1 required: - compatible - reg additionalProperties: false ams-pl@400: type: object additionalProperties: false description: PL-SYSMON is capable of monitoring off chip voltage and temperature. PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring from external master. Out of this interface currently only DRP is supported. This block has alarm generation logic that is used to interrupt the processor based on condition set. properties: compatible: items: - enum: - xlnx,zynqmp-ams-pl reg: description: Register Space for PL-SYSMON. maxItems: 1 '#address-cells': const: 1 '#size-cells': const: 0 patternProperties: "^channel@([2-4][0-9]|50)$": type: object description: Describes the external channels connected. properties: reg: description: Pair of pins the channel is connected to. This value is same as Channel Number for a particular channel. minimum: 20 maximum: 50 xlnx,bipolar: $ref: /schemas/types.yaml#/definitions/flag type: boolean description: If the set channel is used in bipolar mode. required: - reg additionalProperties: false required: - compatible - reg - clocks - ranges additionalProperties: false examples: - | #include bus { #address-cells = <2>; #size-cells = <2>; xilinx_ams: ams@ffa50000 { compatible = "xlnx,zynqmp-ams"; interrupt-parent = <&gic>; interrupts = <0 56 4>; reg = <0x0 0xffa50000 0x0 0x800>; clocks = <&zynqmp_clk AMS_REF>; #address-cells = <1>; #size-cells = <1>; #io-channel-cells = <1>; ranges = <0 0 0xffa50800 0x800>; ams_ps: ams-ps@0 { compatible = "xlnx,zynqmp-ams-ps"; reg = <0 0x400>; }; ams_pl: ams-pl@400 { compatible = "xlnx,zynqmp-ams-pl"; reg = <0x400 0x400>; #address-cells = <1>; #size-cells = <0>; channel@30 { reg = <30>; xlnx,bipolar; }; channel@31 { reg = <31>; }; channel@38 { reg = <38>; xlnx,bipolar; }; }; }; };