# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas RZ/G2L ADC maintainers: - Lad Prabhakar description: | A/D Converter block is a successive approximation analog-to-digital converter with a 12-bit accuracy. Up to eight analog input channels can be selected. Conversions can be performed in single or repeat mode. Result of the ADC is stored in a 32-bit data register corresponding to each channel. properties: compatible: items: - enum: - renesas,r9a07g043-adc # RZ/G2UL and RZ/Five - renesas,r9a07g044-adc # RZ/G2L - renesas,r9a07g054-adc # RZ/V2L - const: renesas,rzg2l-adc reg: maxItems: 1 interrupts: maxItems: 1 clocks: items: - description: converter clock - description: peripheral clock clock-names: items: - const: adclk - const: pclk power-domains: maxItems: 1 resets: maxItems: 2 reset-names: items: - const: presetn - const: adrst-n '#address-cells': const: 1 '#size-cells': const: 0 required: - compatible - reg - interrupts - clocks - clock-names - power-domains - resets - reset-names patternProperties: "^channel@[0-7]$": $ref: adc.yaml type: object description: | Represents the external channels which are connected to the ADC. properties: reg: description: | The channel number. required: - reg additionalProperties: false allOf: - if: properties: compatible: contains: const: renesas,r9a07g043-adc then: patternProperties: "^channel@[2-7]$": false "^channel@[0-1]$": properties: reg: minimum: 0 maximum: 1 else: patternProperties: "^channel@[0-7]$": properties: reg: minimum: 0 maximum: 7 additionalProperties: false examples: - | #include #include adc: adc@10059000 { compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; reg = <0x10059000 0x400>; interrupts = ; clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, <&cpg CPG_MOD R9A07G044_ADC_PCLK>; clock-names = "adclk", "pclk"; power-domains = <&cpg>; resets = <&cpg R9A07G044_ADC_PRESETN>, <&cpg R9A07G044_ADC_ADRST_N>; reset-names = "presetn", "adrst-n"; #address-cells = <1>; #size-cells = <0>; channel@0 { reg = <0>; }; channel@1 { reg = <1>; }; channel@2 { reg = <2>; }; channel@3 { reg = <3>; }; channel@4 { reg = <4>; }; channel@5 { reg = <5>; }; channel@6 { reg = <6>; }; channel@7 { reg = <7>; }; };