# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver maintainers: - Sean Nyekjaer description: | NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports SPI and I2C interface. https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf properties: compatible: enum: - nxp,fxls8962af - nxp,fxls8964af reg: maxItems: 1 vdd-supply: description: phandle to the regulator that provides power to the accelerometer interrupts: maxItems: 1 interrupt-names: enum: - INT1 - INT2 drive-open-drain: type: boolean required: - compatible - reg allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false examples: - | #include i2c { #address-cells = <1>; #size-cells = <0>; /* Example for a I2C device node */ accelerometer@62 { compatible = "nxp,fxls8962af"; reg = <0x62>; interrupt-parent = <&gpio0>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; }; }; - | #include spi { #address-cells = <1>; #size-cells = <0>; /* Example for a SPI device node */ accelerometer@0 { compatible = "nxp,fxls8962af"; reg = <0>; spi-max-frequency = <4000000>; interrupt-parent = <&gpio0>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; }; };