Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf Required properties: - compatible : should be "adi,adxl372" - reg: the I2C address or SPI chip select number for the device Required properties for SPI bus usage: - spi-max-frequency: Max SPI frequency to use Optional properties: - interrupts: interrupt mapping for IRQ as documented in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example for a I2C device node: accelerometer@53 { compatible = "adi,adxl372"; reg = <0x53>; interrupt-parent = <&gpio>; interrupts = <25 IRQ_TYPE_EDGE_FALLING>; }; Example for a SPI device node: accelerometer@0 { compatible = "adi,adxl372"; reg = <0>; spi-max-frequency = <1000000>; interrupt-parent = <&gpio>; interrupts = <25 IRQ_TYPE_EDGE_FALLING>; };