SPRD Hardware Spinlock Device Binding ------------------------------------- Required properties : - compatible : should be "sprd,hwspinlock-r3p0". - reg : the register address of hwspinlock. - #hwlock-cells : hwlock users only use the hwlock id to represent a specific hwlock, so the number of cells should be <1> here. - clock-names : Must contain "enable". - clocks : Must contain a phandle entry for the clock in clock-names, see the common clock bindings. Please look at the generic hwlock binding for usage information for consumers, "Documentation/devicetree/bindings/hwlock/hwlock.txt" Example of hwlock provider: hwspinlock@40500000 { compatible = "sprd,hwspinlock-r3p0"; reg = <0 0x40500000 0 0x1000>; #hwlock-cells = <1>; clock-names = "enable"; clocks = <&clk_aon_apb_gates0 22>; };