# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/apm,xgene-gpio-sb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: APM X-Gene Standby GPIO controller

maintainers:
  - Khuong Dinh <khuong@os.amperecomputing.com>

description: |
  This is a gpio controller in the standby domain. It also supports interrupt in
  some particular pins which are sourced to its parent interrupt controller
  as diagram below:
                                +-----------------+
                                | X-Gene standby  |
                                | GPIO controller +------ GPIO_0
    +------------+              |                 | ...
    | Parent IRQ | EXT_INT_0    |                 +------ GPIO_8/EXT_INT_0
    | controller | (SPI40)      |                 | ...
    | (GICv2)    +--------------+                 +------ GPIO_[N+8]/EXT_INT_N
    |            |   ...        |                 |
    |            | EXT_INT_N    |                 +------ GPIO_[N+9]
    |            | (SPI[40 + N])|                 | ...
    |            +--------------+                 +------ GPIO_MAX
    +------------+              +-----------------+

properties:
  compatible:
    const: apm,xgene-gpio-sb

  reg:
    maxItems: 1

  '#gpio-cells':
    const: 2

  gpio-controller: true

  interrupts:
    description:
      List of interrupt specifiers for EXT_INT_0 through EXT_INT_N. The first
      entry must correspond to EXT_INT_0.

  '#interrupt-cells':
    const: 2
    description:
      First cell selects EXT_INT_N (0-N), second cell specifies flags

  interrupt-controller: true

  apm,nr-gpios:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: Number of GPIO pins

  apm,nr-irqs:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: Number of interrupt pins

  apm,irq-start:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: Lowest GPIO pin supporting interrupts

required:
  - compatible
  - reg
  - '#gpio-cells'
  - gpio-controller
  - interrupts
  - '#interrupt-cells'
  - interrupt-controller

additionalProperties: false

examples:
  - |
    gpio@17001000 {
        compatible = "apm,xgene-gpio-sb";
        reg = <0x17001000 0x400>;
        #gpio-cells = <2>;
        gpio-controller;
        interrupts = <0x0 0x28 0x1>,
                     <0x0 0x29 0x1>,
                     <0x0 0x2a 0x1>,
                     <0x0 0x2b 0x1>,
                     <0x0 0x2c 0x1>,
                     <0x0 0x2d 0x1>;
        #interrupt-cells = <2>;
        interrupt-controller;
        apm,nr-gpios = <22>;
        apm,nr-irqs = <6>;
        apm,irq-start = <8>;
    };