EEPROMs (I2C) Required properties: - compatible : should be ",", like these: "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" "catalyst,24c32" "microchip,24c128" "ramtron,24c64" "renesas,r1ex24002" The following manufacturers values have been deprecated: "at", "at24" If there is no specific driver for , a generic device with and manufacturer "atmel" should be used. Possible types are: "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", "24c128", "24c256", "24c512", "24c1024", "spd" - reg : the I2C address of the EEPROM Optional properties: - pagesize : the length of the pagesize for writing. Please consult the manual of your device, that value varies a lot. A wrong value may result in data loss! If not specified, a safety value of '1' is used which will be very slow. - read-only: this parameterless property disables writes to the eeprom - size: total eeprom size in bytes Example: eeprom@52 { compatible = "atmel,24c32"; reg = <0x52>; pagesize = <32>; };